ProvibTech TM0181-080-00 Extension Cable
ProvibTech TM0181 extension cables boost system performance for critical industrial machinery. These cables extend overall probe life cycle in tough factory settings. You must match probe and cable to equal exactly 5 meters or 9 meters total length. The built-in connector meets strict Πρότυπα API 670 for seamless setup. It works smoothly with major third-party proximity probe systems without hassle. Download our technical manual below to review full wiring instructions for your plant.
Τεχνικά Δεδομένα και Προδιαγραφές
| Μάρκα | ProvibTech |
| Αριθμός μοντέλου | TM0181-080-00 |
| Τύπος προϊόντος | Καλώδιο επέκτασης Proximity Probe |
| Συμβατότητα ανιχνευτή | Standard 5mm and 8mm Probes |
| Μήκος καλωδίου | 8.0 Meters (80) |
| Επιλογή πανοπλίας | None (-00) |
| Λειτουργική ισχύς | -23 VDC to -30 VDC, Current under 12 mA |
| Γραμμική Εύρος | 2.0 mm (80 mil), starts 0.25 mm from target face |
| Ευαισθησία | 7.87 mV/um (200 mV/mil) |
| Σφάλμα γραμμικότητας | Within +/- 0.0254 mm (+/- 1.0 mil) calibrated |
| Απόκριση συχνότητας | 0 Hz to 10.0 kHz (+/- 3 dB) |
| Στόχος Απαίτηση | Minimum target diameter 15 mm (0.6 inches) AISI4140 |
| Όρια θερμοκρασίας | -40 βαθμοί Κελσίου έως +177 βαθμοί Κελσίου operation and storage |
| Περιβαλλοντική Ανοχή | 100% non-condensing humidity protection |
Ανάλυση διαμόρφωσης
- TM0181 Series Architecture
- Probe Diameter: 5mm and 8mm Standard Probes
- Cable Options: Unarmored or Stainless Steel Armor
- Επιλογή μήκους 080: Μήκος καλωδίου 8.0 μέτρων
- Armor Code -00: No Protective Armor Sheath
- Επιλογή μήκους 080: Μήκος καλωδίου 8.0 μέτρων
- Cable Options: Unarmored or Stainless Steel Armor
- Probe Diameter: 5mm and 8mm Standard Probes
Εγκατάσταση, Βαθμονόμηση και Συντήρηση
- Keep total system length strictly at 5m ή 9m to avoid measurement drift.
- Clean all connector contacts with proper contact cleaner before final joint assembly.
- Avoid sharp bends in the cable during routing inside wire trays.
- Ensure tight ground seals on junction boxes to reject plant noise.
- Inspect physical cable jacket annually for outer wear or chemical damage.
Συμβατότητα συστήματος και εφαρμογές
- Πλήρης ευθυγράμμιση με Πρότυπο API 670 monitoring hardware platforms.
- Fits steam turbine vibration monitoring panels seamlessly.
- Monitors shaft position in large heavy-duty centrifugal gas compressors.
- Tracks radial displacement in high-speed industrial water pumps.
- Works with gearbox shaft displacement sensing units.
Λεπτομέρειες αποστολής, εγγύησης και συσκευασίας
- Dispatch speed: Fast delivery in 12 στο 48 ώρες.
- Carrier options: Trusted shipping via FedEx, UPS ή DHL.
- Warranty coverage: Comprehensive 12μηνη εργοστασιακή εγγύηση συμπεριλαμβάνεται.
- Package contents: One sealed ProvibTech TM0181-080-00 cable with protective end caps.
Η διορατικότητα του διευθυντή
This 8-meter extension cable provides outstanding signal stability across high temperature swings. Combining an 8m cable with a 1m probe forms an ideal 9-meter API 670 loop. Heavy machinery relies on this tight tolerance to prevent false vibration trips. Engineered shields block harsh plant electrical noise effectively. It serves as a cost-effective, rugged replacement cable for plant maintenance teams worldwide.
Συχνές ερωτήσεις
What total system length does this cable support?
You must build total system length to either 5 meters or 9 meters. An 8.0-meter cable requires a 1.0-meter probe for proper calibration.
Does the TM0181-080-00 model include armor protection?
No, the -00 suffix indicates this unit has no outer armor metal sheath.
Can I connect this ProvibTech cable to other brands?
Yes, the connector follows API 670 standard specifications for broad compatibility.
How should I store spare cables in the warehouse?
Store cables flat in dry areas between -40 deg C and +177 deg C.
Πνευματικά δικαιώματα © 2026 Oiltech Controls Limited. Με επιφύλαξη παντός δικαιώματος.
Αρχική Πηγή: https://www.oiltechcontrols.com/
Κριτικές
Δεν υπάρχουν σχόλια ακόμη.