Product Highlights
- Extended 9-meter (29.5 ft) FluidLoc cable for maximum installation flexibility.
- Full protection suite: armored case, fluid-resistant cable, and connector protector.
- Premium 1/2-20 UNF threaded stainless steel armored housing.
- Includes ClickLoc connector with protective cover for durability.
- Maintains signal integrity over long cable runs in harsh conditions.
- Original Bently Nevada quality, manufactured in the USA.
Part Number Analysis
- Series: 330702 (11mm Armored Probe)
- Thread: 1/2-20 UNF
- Feature: With Armor
- Configuration: -00-30-90-11-00
- 00: Unthreaded Length (0.0 in)
- 30: Case Length (3.0 in)
- 90: Cable Length (9.0 m / 29.5 ft)
- 11: ClickLoc Connector + Protector & FluidLoc Cable
- 00: Agency Approvals Not Required
Technical Specifications
- Manufacturer & Model: Bently Nevada 330702-00-30-90-11-00
- Type: 11mm Eddy Current Proximity Probe
- Case: AISI 304 SST, Armored, 1/2-20 UNF Thread
- Cable: FluidLoc, 9.0 m, 75 Ω Triaxial
- Connector: Miniature Coaxial ClickLoc with Protector
- Electrical Resistance (9m): 8.5 Ω ± 1.1 Ω
- Temperature Range: -51°C to +177°C
- Probe Tip: Polyphenylene Sulfide (PPS)
- Installation Torque: 15.2 N•m Recommended
- Maximum Torque: 45.2 N•m
- Max Thread Engagement: 0.750 in
- Cable Bend Radius: Minimum 25.4 mm (1.0 in)
- Seal: Viton O-Ring
- Weight: Approx. 0.17 kg
Installation Notes
- This 9m probe is designed for use with a 9-meter Proximitor sensor.
- Apply the recommended torque (15.2 N•m) to the case during mounting.
- Plan the cable route to avoid sharp bends and minimize exposure to abrasion.
- Attach the connector protector after making the ClickLoc connection.
- Ensure proper strain relief for the cable near the connection point.
Ideal Applications
- Vibration monitoring on large turbines, generators, or compressors where the monitor is far away.
- Installations requiring cable runs through cable trays or long conduits.
- Environments with exposure to oils, coolants, or moisture along the cable path.
- Applications where both mechanical protection and long reach are critical.
FAQ & Selection Tips
What is the main use for a 9-meter cable?
A 9-meter cable is used when the monitoring system (the Proximitor) is located far from the measurement point on the machine, such as in a separate control room or cabinet.
How does cable length affect probe resistance?
Longer cables have higher electrical resistance. The 330702-00-30-90-11-00 has a specified resistance of 8.5 Ω for its 9m length, which is factored into the system’s calibration.
Can I cut the 9m cable to a shorter length?
No. Cutting the cable will change its electrical characteristics (resistance, capacitance) and ruin the system calibration. Always use the probe at its specified length.
Is signal quality maintained over 9 meters?
Yes, when used with the correctly matched 9-meter Proximitor sensor, the system is designed to maintain accurate signal transmission and measurement integrity.
How do I choose between 5m and 9m cable lengths?
Choose the 330702-00-30-90-11-00 (9m) if the distance from the probe mounting point to the Proximitor exceeds 5 meters. Measure your required run length, including service loops, before selecting.
Ordering & Support Information
- Condition: New, Original Equipment.
- Shipping: Fast international delivery via FedEx, UPS, DHL.
- Warranty: Protected by a 12-month warranty against defects.
- Contact Us: Email info@oiltechcontrols.com or message on WhatsApp: +86 158 8020 0923.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Partner PLCDCS HUB Limited https://plcdcshub.com/. All rights reserved.
Powergear X Automation Limited https://www.powergearx.com/
Reviews
There are no reviews yet.