Key Features & Benefits
- Complete protection package with armored case and FluidLoc cable.
- Includes a connector protector to shield the electrical connection from damage.
- Long 5-meter FluidLoc cable resists oils, coolants, and moisture.
- Robust 1/2-20 UNF threaded stainless steel armored housing.
- Ensures reliable signal integrity for precise vibration monitoring.
- Manufactured in the USA to Bently Nevada’s high standards.
330702-00-30-50-11-00 Configuration
- Series: 330702 (11mm Armored Probe)
- Diameter: 11 mm
- Protection: Armored Case
- Specification: -00-30-50-11-00
- 00: Unthreaded Length (0.0 in)
- 30: Case Length (3.0 in)
- 50: Cable Length (5.0 m)
- 11: ClickLoc Connector with Protector & FluidLoc Cable
- 00: Agency Approvals Not Required
Complete Technical Data
- Manufacturer & Part Number: Bently Nevada 330702-00-30-50-11-00
- Probe Type: 11mm Eddy Current Proximity
- Case: AISI 304 Stainless Steel, Armored, 1/2-20 UNF
- Cable: FluidLoc, 5.0 m, 75 Ω Triaxial
- Connector: Miniature Coaxial ClickLoc with Protector
- Electrical Resistance: 7.2 Ω ± 0.8 Ω (for 5m system)
- Temperature Rating: -51°C to +177°C
- Probe Tip: Polyphenylene Sulfide (PPS)
- Installation Torque: 15.2 N•m (Recommended)
- Max Torque: 45.2 N•m
- Cable Bend Radius: Minimum 25.4 mm
- Seal: Viton O-Ring
- Sensor Compatibility: 5-meter Proximitor Sensor Only
- Weight: Approx. 0.17 kg
Installation Best Practices
- Use only with a matching 5-meter Proximitor sensor.
- Apply correct torque (15.2 N•m) to the probe case during installation.
- Install the connector protector after mating the ClickLoc connector.
- Route the FluidLoc cable away from sharp edges and heat sources.
- Maintain the minimum bend radius to prevent cable damage.
Primary Use Cases
- Critical vibration monitoring in wet or oily industrial environments.
- Turbo-machinery protection in power generation and oil & gas.
- Applications where connector physical protection is essential.
- Long-distance monitoring setups requiring fluid-resistant cabling.
FAQ & Selection Guidance
What is the purpose of the connector protector?
The connector protector is a cover that snaps onto the mated ClickLoc connector. It provides mechanical protection and helps prevent contamination from dust, fluids, or accidental impact.
How does option “11” differ from “12”?
Option 11 includes the ClickLoc connector protector; option 12 does not. Both use the FluidLoc cable, but “11” offers enhanced connector protection.
Is this probe suitable for hazardous areas?
This specific configuration (option 00 for approvals) is for standard industrial use. For hazardous areas, you need a model with appropriate agency approval codes (e.g., 05, 10).
What happens if I use a 1m or 9m Proximitor with this 5m probe?
The system calibration will be incorrect, leading to inaccurate gap voltage readings and potentially causing false alarms or missed alerts. Always match cable lengths.
When should I choose this model over a standard cable version?
Select the 330702-00-30-50-11-00 when your installation is exposed to fluids, requires extra connector protection, and needs a 5-meter cable run to the monitor.
Ordering, Shipping & Warranty
- Condition: Brand New, Original Manufacturer Packaging.
- Global Shipping: Available via FedEx, UPS, and DHL.
- Quality Assurance: Backed by a 12-month warranty.
- Contact for Details: info@oiltechcontrols.com | +86 158 8020 0923 (WhatsApp)
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Partner PLCDCS HUB Limited https://plcdcshub.com/. All rights reserved.
Powergear X Automation Limited https://www.powergearx.com/
Reviews
There are no reviews yet.