Product Identity
- Brand: Bently Nevada
- Model: 330702-00-26-50-12-00
- Series: 3300 XL
- Probe Size: 11 mm
- Manufacturing Origin: USA
Functional Role
This probe detects shaft motion and position.
It supports machine protection systems.
FluidLoc cable blocks fluid migration.
330702-00-26-50-12-00 Code Tree
- 330702
- 11 mm probe
- 1/2-20 UNF thread
- Stainless steel armor
- 26
- Overall case length: 2.6 in
- 50
- Total cable length: 5.0 m
- Designed only for 5 m Proximitor
- 12
- Miniature ClickLoc connector
- FluidLoc sealed cable
Material Selection
- Probe Tip: PPS plastic
- Probe Housing: AISI 304 stainless steel
- Seal Type: Viton O-ring
- Cable Jacket: FEP insulation
Electrical Behavior
- Characteristic Impedance: 75 ohms
- DC Resistance at 5 m: 7.2 ohms ±0.8
- Signal Consistency: High
- Interference Resistance: Strong
Mechanical Limits
- Maximum Thread Engagement: 0.750 in
- Recommended Torque: 15.2 N·m
- Maximum Torque: 45.2 N·m
- Minimum Cable Bend Radius: 25.4 mm
Thermal and Environmental Data
- Operating Temperature: -52°C to +177°C
- Storage Temperature: -52°C to +177°C
- Seal Risk Below: -34°C
- Designed for oil and mist exposure
Temperature Classification
- EPL Ga / Gc
- T1: -55°C to +232°C
- T2: -55°C to +177°C
- T3: -55°C to +120°C
- T4: -55°C to +80°C
- T5: -55°C to +40°C
- EPL Dc
- T280°C at Ta -55°C to +232°C
- T225°C at Ta -55°C to +177°C
- T170°C at Ta -55°C to +120°C
- T130°C at Ta -55°C to +80°C
- T105°C at Ta -55°C to +100°C
- T90°C at Ta -55°C to +40°C
Key Advantages
- FluidLoc cable prevents oil migration
- Stable signal in wet environments
- Armored design improves durability
- Wide temperature capability
- Exact match for 3300 XL systems
Typical Installations
- Oil-lubricated turbines
- Compressors with mist environments
- Gearboxes with shaft monitoring
- Critical rotating equipment
Logistics and Warranty
- Shipping Weight: 0.17 kg
- Industrial protective packaging
- Warranty Period: 12 months
- Courier Options: FedEx, UPS, DHL
Professional FAQ
When is FluidLoc cable required?
It is best for oil or fluid-rich environments.
Can this probe replace a standard cable version?
Yes, if the Proximitor length matches.
What improves long-term accuracy?
Correct torque and proper cable routing.
Is FluidLoc harder to install?
No. Installation steps are the same.
Who should select this model?
Users with oil mist or fluid exposure risks.
Contact Information Inquiries:
info@oiltechcontrols.com |
+86 158 8020 0923
Copyright © 2025 Oiltech Controls Limited. All rights reserved.
Original Source:
https://www.oiltechcontrols.com/
Partner:
PLCDCS HUB Limited. All rights reserved.
Jason Miller –
We used this 3300 XL series 11mm proximity probe on a gas turbine application. The probe was delivered new and matched the listed specifications. Installation and gap setting were completed without difficulty. Since commissioning, the signal has remained stable under normal operating conditions. Order processing and shipping were handled efficiently, allowing us to stay on schedule. The product performed as intended for this application.