330702-00-26-90-01-00 Bently Nevada 3300 XL 11mm Proximity Probe

Product Snapshot

• Manufacturer: Bently Nevada
• Product No.: 330702-00-26-90-01-00
• Series: 3300 XL
• Probe Size: 11 mm
• Thread: 1/2-20 UNF
• Origin: Made in U.S.A

330702-00-26-90-01-00 Code Logic (Indented Tree)

• 330702
  • 3300 XL 11 mm proximity probe
  • Armored probe body
  • Heavy-duty industrial design
• 00
  • Unthreaded length: 0 inch
• 26
  • Overall case length: 2.6 inches
• 90
  • Total probe length: 9.0 meters
  • Optimized for long-distance routing
• 01
  • Miniature ClickLoc connector
  • Connector protector included
• 00
  • No agency approval required

Key Performance Highlights

• Stable signal at long cable length
• High resistance to vibration noise
• Strong armor for mechanical protection
• Low drift over temperature changes
• Designed for continuous operation

Electrical & Measurement Data

• Probe resistance
  • 9.0 m length
  • 8.5 Ω ± 1.1 Ω
• Cable impedance
  • 75 Ω triaxial cable
  • FEP insulation
• Signal stability
  • Low attenuation
  • High EMI immunity

Mechanical & Material Design

• Probe tip
  • PPS material
  • Oil and chemical resistant
• Probe case
  • AISI 304 stainless steel
  • Corrosion resistant
• Thread engagement
  • Max length: 0.750 inch

Torque & Installation Limits

• Case torque
  • Maximum: 45.2 N·m
  • Recommended: 15.2 N·m
• Connector torque
  • Finger tight recommended
  • Maximum: 0.565 N·m
• Minimum bend radius
  • 25.4 mm

Environmental Endurance

• Operating temperature: -52°C to +177°C
• Storage temperature: same as operating
• Avoid exposure below -34°C
• Viton O-ring pressure seal

Applications & Use Cases

• Steam turbine shaft monitoring
• Gas compressor vibration protection
• Large pump displacement measurement
• Critical rotating equipment

Packaging, Shipping & Warranty

• Factory sealed new probe
• Shipping weight: 0.17 kg
• Courier options: FedEx, UPS, DHL
• 12-month warranty

Professional FAQ

• Is a 9-meter probe suitable for high-noise plants?
  Yes. The triaxial cable reduces signal interference.
• Does armor affect probe accuracy?
  No. Armor only improves mechanical protection.
• When should I choose 11mm instead of 8mm?
  Use 11mm for longer distance and stronger signals.
• Can this probe replace older 3300 series models?
  Yes. It supports retrofit upgrades.
• What should I check before ordering?
  Confirm thread size, cable length, and monitor type.

Contact Information Inquiries:
info@oiltechcontrols.com |
+86 158 8020 0923

Copyright © 2025 Oiltech Controls Limited. All rights reserved.

Original Source:
https://www.oiltechcontrols.com/

Partner
PLCDCS HUB Limited.
All rights reserved.