Module Snapshot
- Brand: Bently Nevada
- Part Number: 330707-00-20-10-12-05
- Product Line:
3300 XL 11mm Probe
- Origin: Made in U.S.A
- Main Task: Precise shaft displacement sensing
Why This Probe Matters
- Built for critical rotating equipment protection.
- FluidLoc cable helps reduce oil and fluid ingress risk.
- Stable output for long-term vibration monitoring.
- Strong case material for harsh plant areas.
- Approved for multi-region industrial projects.
Configuration Tree (Suffix Meaning)
- 330707-00-20-10-12-05
- 00 → Unthreaded length: 0.0 in
- 20 → Case length: 2.0 in
- 10 → Total length: 1.0 m (3.3 ft)
- 12 → ClickLoc connector + FluidLoc cable
- 05 → Multiple agency approvals
Electrical & Signal Data
- Cable Impedance: 75 Ω triaxial system
- DC Resistance (1m): 5.9 ± 0.5 ohms
- Signal Stability: Designed for low-noise proximity measurement
- Best Practice: Use correct matching proximitor total length
Mechanical & Material Specs
- Thread Style: 5/8-18 UNF
- Thread Engagement Limit: 0.938 in max
- Probe Tip: PPS polymer for wear resistance
- Probe Housing: AISI 304 stainless steel
- Shipping Weight: Approx. 0.17 kg
Torque & Handling Limits
- Recommended Mount Torque: 15.2 N·m
- Maximum Rated Torque: 45.2 N·m
- Connector Tightening: Finger tight is enough
- Connector Max Torque: 0.565 N·m
- Minimum Cable Bend Radius: 25.4 mm
Environmental Endurance
- Operating Range: -52°C to +177°C
- Storage Range: Same as operating limits
- Seal Material: Viton O-ring pressure seal
- Field Note: Below -34°C may reduce seal life
Key Selling Points
- FluidLoc cable improves reliability in wet environments.
- Mini ClickLoc design supports fast installation.
- Multiple approvals support global plant standards.
- Optimized for turbine, compressor, and generator monitoring.
- Supports standard probe lengths: 1m, 5m, 9m.
Shipping & Warranty
- Warranty: 12 months support and replacement coverage.
- Courier Options: FedEx, UPS, DHL worldwide shipping.
- Each probe ships with safe export packaging.
FAQ (Expert Guidance)
- What is the advantage of FluidLoc cable in real plants?
- It helps block fluid travel inside the cable path.
- How do I avoid wrong installation torque?
- Use the recommended 15.2 N·m and never exceed limits.
- Why are multiple approvals important for buyers?
- They simplify acceptance in international projects.
- What should I check when replacing an old probe?
- Match thread type, total length, and connector style.
- When should I choose 1m instead of 9m length?
- Shorter cables reduce noise if the rack is close.
Sales Contact
- Email:
info@oiltechcontrols.com - WhatsApp:
+86 158 8020 0923
- Copyright © 2025 Oiltech Controls Limited. All rights reserved.
- Original Source:
- Partner
PLCDCS HUB Limited
. All rights reserved.
Reviews
There are no reviews yet.