330904-00-10-50-01-00 | Bently Nevada 3300 NSv Vibration Probe

New 330904-00-10-50-01-00 3300 NSv Proximity Probe

Brand: Bently Nevada. Condition: New & Original. Warranty: 12 Months. Shipping: FedEx, UPS, DHL.

Key Features

• Measures vibration and position on rotating machinery.
• Stainless steel case with M8X1 thread.
• Chemical-resistant PPS tip for tough environments.
• Works with older 3300 RAM system parts.
• 5.0-meter cable with easy-click connector.
• Stable performance from -52°C to +177°C.

Technical Specifications

• Part Number: 330904-00-10-50-01-00
• Linear Range: 1.5 mm (0.06 inches)
• Best Gap Setting: 1.0 mm (40 mils)
• Output Sensitivity: 7.87 V/mm (±12.5%/-20%)
• Probe DC Resistance: 5.3 ohms ± 0.7 ohms
• Cable Length: 5.0 meters (16.4 feet)
• Frequency Response: 0 to 10 kHz
• Minimum Target Size: 8.9 mm diameter
• Maximum Torque: 0.56 N•m (5 in•lb)
• Maximum Field Wiring: 305 meters (1000 feet)

Warranty Info

This 3300 NSv probe has a 12-month warranty. It covers defects in materials and workmanship. The warranty starts on the purchase date. Please keep your order details.

FAQ

• Q: Can I use this 330904 probe on a small shaft?
  A: Yes, but for shafts under 13mm, the output may change. Use a smaller gap to help.
• Q: What is the pressure rating?
  A: The probe has a Viton O-ring seal. It is not pressure tested before shipping. Contact us for high-pressure uses.
• Q: How does long cable affect the signal?
  A> Long field wiring can reduce the high-frequency signal. Check the manual for runs over 305 meters.
• Q: What is DSL?
  A: Deviation from Straight Line is less than ±0.06 mm. This means the output is very linear.
• Q: How tight can I bend the cable?
  A: The minimum bend radius is 25.4 mm (1.0 inch). Bending it tighter can cause damage.

Download Manual

Get the full datasheet for the 3300 XL NSv system here:
Download 3300 XL NSv Proximity Transducer System Datasheet

© 2025 World of PLC Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Technical Support: Email: info@oiltechcontrols.com Phone: +86 158 8020 0923
Partner: PLCDCS HUB Limited https://plcdcshub.com/ | PLC Pioneer Limited https://plc-pioneer.com/