Product Snapshot
- Model: 330910-14-19-10-02-00
- Series: 3300 NSv Proximity Probes
- Brand: Bently Nevada
- Status: New and original
- Warranty: 12 months coverage
Built for accurate shaft monitoring.
Strong signal stability in harsh sites.
Designed for compressors and turbines.
Improved chemical resistance ensures long life.
330910-14-19-10-02-00 Structure
- 330910
- NSv probe with armored cable
- -14
- Unthreaded length: 140 mm
- -19
- Case length: 190 mm
- -10
- Total cable length: 1 meter
- -02
- Mini ClickLoc connector
- -00
- No certification required
Performance Highlights
- Fast response for dynamic signals
- Stable output over long cable runs
- Low signal noise design
- High resistance to oil and chemicals
- Strong anti-interference ability
Core Technical Metrics
- Range: 0.25 mm to 1.75 mm
- Sensitivity: 7.87 V/mm
- Accuracy: ±0.06 mm
- Frequency: 0–10 kHz
- Resistance: 4.2 ohms typical
- Capacitance: 69.9 pF/m
- Cable Type: 75Ω coaxial
- Temp Range: -52°C to +177°C
- Min Target Size: 8.9 mm
- Best Gap: 1.0 mm
Mechanical & Material
- Tip: PPS material
- Case: Stainless steel 304
- Seal: Viton O-ring
- Bend radius: ≥25.4 mm
- Lightweight compact structure
Installation Notes
- Use finger-tight torque for probe tip
- Avoid over-tightening connectors
- Keep wiring shield grounded
- Maintain correct probe gap
- Use triad cable for best results
Application Scope
- Gas compressors
- Steam turbines
- Industrial pumps
- Rotating shafts
- Motor monitoring systems
Compatibility Note
- Fully interchangeable with 3300 RAM probes
- Works with NSv extension cables
- Supports long-distance wiring up to 305 m
Packing & Shipping
- Original sealed package
- Includes probe unit
- Global delivery available
- Courier: FedEx, UPS, DHL
Warranty Terms
- 12 months factory warranty
- Covers manufacturing defects
- Excludes improper installation damage
- Technical support available
FAQ
- How to select probe length?
Choose based on mounting depth and space. - What cable type is recommended?
Use shielded triad cable for stable signal. - Can it work in oil environments?
Yes, materials resist oil and chemicals. - How to reduce signal noise?
Ensure proper grounding and avoid sharp bends. - Is calibration required after install?
No, system is pre-calibrated for direct use.
Quick Contact
- Email: info@oiltechcontrols.com
- WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Partner PLCDCS HUB Limited https://plcdcshub.com/. All rights reserved.
Powergear X Automation Limited https://www.powergearx.com/
Reviews
There are no reviews yet.