330930-040-03-CN Bently Nevada 3300 NSv Extension Cable In Stock Ready To Ship

Engineering Overview

The Bently Nevada 330930-040-03-CN is a 4.0-meter 75-ohm coaxial extension cable engineered for the 3300 NSv (Narrow Sideview) proximity transducer system. Constructed with premium fluoroethylene propylene (FEP) insulation, this cable delivers stable signal transfer across severe thermal environments ranging from -52°C to +177°C. Designed for tight-clearance installations, it connects an NSv proximity probe to a 3300 XL NSv Proximitor Sensor. The assembly features gold-plated brass connectors for low contact resistance and includes a factory connector protector to prevent fluid ingress. To maintain a linear measurement range of 1.5 mm (60 mils), field engineers must match combined probe and extension cable lengths to exact Proximitor system specifications.

Technical Specifications Table

Configuration Breakdown & Tree Breakdown

• 330930 Base 3300 NSv Extension Cable
  • -040 Cable Length Option: 4.0 Meters (13.1 Feet)
    • -03 Connector Option: Without Stainless Steel Armor, Includes Connector Protector
    • -CN Agency Approval: Country Specific Certification Approval
    • Core Build: 75 Ω FEP Coaxial Cable with Gold-Plated Brass Contacts

Applications & Diagnostic Capabilities

The 330930-040-03-CN extension cable serves narrow-gap machinery applications where standard probe heads cannot fit due to physical counterbore limitations.

• Small centrifugal compressor shaft position and dynamic vibration monitoring
• Auxiliary power plant pump bearing clearance tracking in cramped housings
• High-speed turbo-charger shaft displacement detection
• Diagnostic logging of shaft runout, radial tilt, and unbalance harmonics
• Linking field-mounted NSv probes to remote 3300 XL NSv Proximitor units

Why Buy From Oiltech Controls?

• Over 15 years supporting industrial automation and critical machinery protection systems.
• Fast international dispatch network providing express door-to-door shipping.
• Fully tested surplus, new-in-box, and reconditioned component availability.
• Comprehensive 12-month quality replacement guarantee on all hardware.
• Strict technical verification testing before every order leaves our warehouse.
• Specialized inventory sourcing for mature, legacy, and obsolete control modules.

Oiltech Controls Limited’s Insight

Mismatching extension cable lengths with Proximitor calibrations is a leading cause of scale factor errors during machinery commissioning. The Bently Nevada 330930-040-03-CN provides exactly 4.0 meters of length. When combined with a 1.0-meter probe, it completes a 5.0-meter electrical system balance. Always use the silicone connector protector supplied with option -03. Moisture or oil creeping into the gold-plated connector alters cable capacitance (69.9 pF/m nominal), distorting the linear -1 Vdc to -13 Vdc output signal curve.

Selection & Wiring Guidance

Follow these engineering guidelines to ensure optimal signal integrity across your installation loop:

• Confirm your total system length equals target Proximitor calibration specs (e.g., 5m total length).
• Select triad field wiring between 0.2 to 1.5 mm² (16 to 24 AWG) for runs up to 305 meters (1,000 feet).
• Avoid exceeding 220 N (50 lb) tensile pull force on cable connections during installation routing.
• For rapid quotes and order processing, contact our sales desk at info@oiltechcontrols.com or message us via WhatsApp at +86 158 8020 0923.

Frequently Asked Questions

Q: What happens if I connect a 4.0m extension cable to a probe calibrated for a 9.0m Proximitor system?
A: Total electrical length will fall short, causing severe calibration error, shifted voltage bias, and invalid vibration peak readings.

Q: How does the -03 option connector protector improve reliability?
A: The protector seals the coaxial junction against conductive liquids, maintaining constant 75-ohm impedance and preventing signal attenuation.

Q: What maximum distance can I run field wiring from the Proximitor Sensor to the monitor rack?
A: Recommended three-conductor shielded triad wiring permits runs up to 305 meters (1,000 feet) before high-frequency signal rolloff occurs.

Q: Can this unarmored FEP cable handle ambient engine room temperatures?
A: Yes. FEP insulation tolerates continuous exposure from -52°C up to +177°C without cracking or degrading dielectrics.

Q: What express shipping methods do you offer for emergency site outages?
A: We dispatch stock items in 12 to 48 hours utilizing global carriers such as FedEx, UPS, and DHL.

Copyright © 2026 Oiltech Controls Limited. All rights reserved.

Original Source: https://www.oiltechcontrols.com/

All rights reserved.