6ES7467-5GJ02-0AB0 Siemens S7-400 PROFIBUS Master

Siemens 6ES7467-5GJ02-0AB0 PROFIBUS Master Module

The Siemens 6ES7467-5GJ02-0AB0 is a dedicated SIMATIC S7-400 IM 467 PROFIBUS DP master interface module designed for high-density field device integration.

This hardware sub-module expands the host controller capacity by embedding a deterministic RS485 fieldbus gateway directly into the S7 backplane.

It handles up to 96 distributed I/O slaves with hardware-supported equidistance and direct slave-to-slave lateral data exchange, freeing up crucial CPU cycle overhead in complex topologies.

Looking for mounting clearances, register maps, or wiring diagrams? Follow this link to Download the 6ES7467-5GJ02-0AB0 Technical Manual.

For urgent engineering support or stock inquiries, contact our team:

• Email: info@oiltechcontrols.com
• WhatsApp: +86 158 8020 0923

Oiltech Controls’ Insight

• Deterministic I/O Processing: The 6ES7467-5GJ02-0AB0 hardware handles time-critical cross-traffic independently from the main processor scan cycle.
• Backplane Power Overhead: Note the 1300 mA maximum current draw on the 5 V DC rail when sizing your S7-400 power supply modules.
• Legacy Fieldbus Lifecycle: This module is an excellent choice for maintaining high-speed RS485 network assets without rewriting your STEP 7 code blocks base.

Technical Parameters & Material Data

• Brand & Part Number: Siemens 6ES7467-5GJ02-0AB0 (SIMATIC S7-400 Series).
• Module Architecture: Distributed I/O communication processor / IM 467 master interface.
• Physical Interface: 9-pin sub D socket utilizing standard RS485 industrial differential signaling.
• Data Transmission Rate: Scalable up to 12 Mbit/s maximum bus velocity.
• Network Constraints: Controls up to 96 DP slaves with a maximum of 32 concurrent active connections.
• Power Metrics: Rated 5 V DC (+/- 5%) backplane draw at a maximum of 1300 mA consumption.
• Operational Environment: Operates from 0 to 60 °C; maximum operational altitude up to 3000 meters above sea level.
• Storage Tolerances: Withstands temperatures between -40 °C and 70 °C at 95% non-condensing relative humidity.
• Form Factor Dimensions: Standard single-slot width of 25 mm x 290 mm height x 210 mm depth; net weight approximately 700 grams.

Target Equipment Compatibility

• Siemens SIMATIC S7-400 Central Racks (CR) running performance-tier CPU architectures.
• ET 200M, ET 200S, and ET 200SP distributed remote I/O drop stations.
• Industrial PROFIBUS DP compatible field instrumentation, variable frequency drives, and pneumatic valve manifolds.

Global Logistics & Factory Warranty

• Dispatch Lead Time: Guaranteed secure shipping within 24-28 hours from order validation.
• Express Logistics Networks: Worldwide global delivery handled via premium air services including FedEx, UPS, and DHL.
• Contractual Protection: Complete hardware purchase is covered by a comprehensive 12-month quality warranty.

Professional FAQ & Selection Guidance

Q: How many 6ES7467-5GJ02-0AB0 modules can I install in a single central rack chassis?

A: You can install up to 10 modules per CPU within the Central Rack (CR). However, the exact configuration limits depend directly on the processing power and connection resources of your host S7-400 CPU.

Q: What should I check if the module fails to establish communication at 12 Mbit/s on longer segments?

A: In high-speed 12 Mbit/s environments, always verify that active termination resistors are switched on at both physical ends of the PROFIBUS segment. Additionally, keep your total unrepeated segment length under 100 meters using standard copper Type A bus cable.

Q: Does this module support cross-traffic between slaves without routing through the CPU?

A: Yes. The module features integrated hardware support for direct data exchange (slave-to-slave communication) and equidistance, which ensures deterministic timing for drive synchronization applications.

Q: Can I use the 6ES7467-5GJ02-0AB0 as a DP slave interface in an expansion rack?

A: No. This specific sub-module operates strictly as a PROFIBUS DP Master interface and is designed exclusively for installation in central racks (CR) to control lower-level field infrastructure.

Q: What is the recommended upgrade path if my network requires fiber optic physical layers?

A: The module relies on pure copper RS485 differential signaling via its 9-pin sub D socket. To interface with fiber optic runs, you must integrate an external Optical Link Module (OLM) directly into the fieldbus line.

Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.

All rights reserved.