Bently Nevada 3300 NSv 330910-00-13-10-02-00 Proximity Probe M10 Armored Sensor

Product Overview

• Brand: Bently Nevada
• Model: 330910-00-13-10-02-00
• Series: 3300 NSv Proximity Probes
• Type: Eddy current displacement sensor
• Condition: New and factory sealed
• Warranty: 12 months

The 3300 NSv Proximity Probes provide stable shaft measurement. They work well in harsh industrial environments. They offer strong chemical resistance.

This model gives accurate displacement signals. It supports long cable runs with low noise. It fits both new and existing systems.

Configuration Breakdown

• 330910
  • NSv probe, M10x1 thread, armored cable
• -00
  • Unthreaded length: 0 mm
• -13
  • Case length: 130 mm
• -10
  • Total length: 1.0 meter
• -02
  • Mini ClickLoc connector
• -00
  • No approval required

Key Technical Data

• Measurement Range: 0.25 to 1.75 mm
• Recommended Gap: 1.0 mm
• Sensitivity: 7.87 V/mm
• Linearity: ±0.06 mm
• Frequency Response: 0 to 10 kHz
• Probe Resistance: 4.2 ± 0.5 ohms
• Cable Capacitance: 69.9 pF/m
• Temperature Range: -52°C to +177°C
• EMI Resistance: Shielded coaxial cable
• Bend Radius: ≥25.4 mm

Installation Guidance

• Set gap close to 1.0 mm
• Use correct torque values
• Keep proper thread engagement
• Use shielded triad cable
• Avoid sharp cable bends
• Ensure good grounding

Commissioning & Maintenance

• Quick installation process
• No complex calibration needed
• Stable output over time
• Easy replacement and upgrade
• Low maintenance cost

Compatibility

• Compatible with 3300 RAM probes
• Works with NSv Proximitor sensors
• Supports existing extension cables
• Fits common monitoring systems

Environmental & Safety

• Supports hazardous areas
• Temperature classes T1 to T5
• High chemical resistance
• Stable in oil and industrial fluids

Typical Applications

• Steam turbines
• Gas compressors
• Industrial pumps
• Electric motors

Diagnostic Capabilities

• Detect shaft vibration
• Measure axial movement
• Identify imbalance issues
• Track bearing wear

Packing & Delivery

• Original sealed packaging
• Includes probe unit
• Safe export packing
• Shipping via FedEx, UPS, DHL

FAQ

• What is the best gap setting?
  Use 1.0 mm for stable output.
• Can it replace old models?
  Yes, it replaces 3300 RAM probes.
• Is it suitable for harsh environments?
  Yes, it resists chemicals and heat.
• What cable length is supported?
  Up to 305 meters with proper wiring.
• How to ensure accuracy?
  Maintain correct gap and grounding.
• How to choose the right model?
  Check thread, length, and connector type.

Selection Guide

• Select correct mounting thread
• Choose suitable cable length
• Confirm connector type
• Match system compatibility
• Check temperature requirements

Copyright © 2026 Oiltech Controls Limited. All rights reserved.

Original Source: https://www.oiltechcontrols.com/

Partner PLCDCS HUB Limited https://plcdcshub.com/

Powergear X Automation Limited https://www.powergearx.com/

All rights reserved.