Bently Nevada 3300 NSv Probe 330903-00-04-05-12-00 | Vibration Sensor

Bently Nevada 3300 NSv Proximity Probe

Get the new 330903-00-04-05-12-00 proximity probe. This Bently Nevada 3300 NSv probe is perfect for machine health monitoring. It comes in original factory seal. We offer fast shipping with FedEx, UPS, and DHL.

Understanding Your Model Number: 330903-00-04-05-12-00

• 330903: 3300 NSv Probe, M8X1 thread, no armor
• 00: Unthreaded length = 0 mm
• 04: Overall case length = 40 mm
• 05: Total cable length = 0.5 meter (20 inches)
• 12: Connector: Miniature coaxial ClickLoc, FluidLoc cable
• 00 Agency Approval: Not required

Key Technical Specifications

• Brand: Bently Nevada
• Model: 3300 NSv Proximity Probe
• Part Number: 330903-00-04-05-12-00
• Measurement Range: 1.5 mm (60 mils)
• Output: -1 to -13 Vdc
• Scale Factor: 7.87 V/mm (200 mV/mil)
• Accuracy: Better than ±0.06 mm (±2.3 mils)
• Frequency Response: 0 to 10 kHz
• Temperature Range: -52°C to +177°C (-62°F to +351°F)
• Cable Length: 0.5 meter
• Probe Resistance: 4.0 ± 0.5 ohms
• Case Material: AISI 304 Stainless Steel
• Tip Material: PPS (Polyphenylene Sulfide)
• Minimum Target: 13 mm (0.5 in) diameter
• Max Cable Bend: 25.4 mm (1.0 in) radius

How To Install

• Hand-tighten the probe first.
• Use a torque wrench for final tightening.
• Do not exceed 0.56 N•m (5 in•lb) of torque.
• Set the gap to 1.0 mm (40 mils) from the target.
• Ensure the target is larger than 13 mm (0.5 in).

Will It Work With My System?

This 3300 NSv probe works with older 3300 RAM systems. It is a direct replacement. It connects to 3300 XL NSv Proximitor sensors. Use a shielded triad cable for best results. The max cable run is 305 meters (1000 feet).

What You Get & Warranty

• One new Bently Nevada 330903-00-04-05-12-00 probe.
• Original factory packaging and documents.
• Full 12-month warranty against defects.

Frequently Asked Questions

• What is the difference between the NSv and RAM probe?
  The NSv probe has a better chemical resistance. It is more durable in tough environments.
• What cable should I use with this probe?
  Use a three-conductor shielded triad cable for the best signal quality.
• Can I use this on a small shaft?
  Yes, but for shafts under 13mm, the scale factor may change. Reduce the gap to help with this.
• What is the lifetime of this probe?
  It has a long life. The tough materials can handle high temperatures and chemicals.
• How do I connect the cable?
  It uses a Miniature Coaxial ClickLoc connector. It is easy to connect and disconnect.

© 2025 World of PLC Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Need Help? Email: info@oiltechcontrols.com or WhatsApp: +86 158 8020 0923
Our Partners: PLCDCS HUB Limited | PLC Pioneer Limited