Bently Nevada 3300 NSv Probe | 330904-08-10-05-12-05 – FluidLoc Cable

Bently Nevada 3300 NSv Proximity Probe

Get the new 330904-08-10-05-12-05 probe. It is original and unused. This 3300 NSv probe is perfect for tough jobs. It has a special FluidLoc cable. This cable resists oils and chemicals. We offer a full 12-month protection. Fast shipping with FedEx, UPS, DHL.

Want all the details? Download the complete guide here.

Understanding Your Probe’s Code: 330904-08-10-05-12-05

• 330904: This is the base 3300 NSv probe with an M8 thread.
• 08: The smooth part of the probe is 80 mm long.
• 10: The entire metal case is 100 mm long.
• 05: Your cable is 0.5 meters (20 inches) long.
• 12: It has a ClickLoc connector and FluidLoc cable.
• 05: Meets many international safety rules.

Key Technical Details

• Measurement Range: 1.5 mm (60 mils)
• Best Distance to Target: 1.0 mm (40 mils)
• Signal Output: -1 to -13 Vdc
• How Sensitive It Is: 7.87 V/mm (200 mV/mil)
• Temperature Limits: -52°C to +177°C
• Frequency Response: 0 to 10,000 Hz
• Minimum Target Size: 13 mm diameter is best
• Cable Resistance: 4.0 ohms (for 0.5m cable)

Installation Notes

• Screw it in by hand first.
• Then tighten to 5.1 N•m (45 in•lb) with a tool.
• Do not bend the cable too sharply.
• Keep the bend radius larger than 25.4 mm.

Compatibility & Use

This 330904-08-10-05-12-05 probe replaces older models. It works with 3300 RAM systems. No extra parts are needed. The FluidLoc cable is great for wet areas.

What You Receive

• One Bently Nevada 3300 NSv proximity probe.
• Item is new in the original box.
• Your purchase is protected for 12 months.

Expert Questions Answered

• What is FluidLoc cable?
• FluidLoc cable has a special jacket. It resists oils, fuels, and chemicals. It is perfect for harsh factory environments.
• Can I use this probe for axial position measurement?
• Yes, you can. For best results, use a target larger than 13 mm. A smaller shaft may change the signal slightly.
• What is the maximum wiring length to the monitor?
• You can use up to 305 meters (1000 feet) of cable. Very long cables may reduce the signal for very fast vibrations.
• How does the pressure seal work?
• The probe has a Viton O-ring seal. It protects the inside from pressure differences. It is not tested before shipping.
• Is the output signal linear?
• Yes. The signal is very linear across the 1.5 mm range. The error is less than ±0.06 mm from a perfect line.

© 2025 World of PLC Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Need Help? Email: info@oiltechcontrols.com | WhatsApp: +86 158 8020 0923
Partners: PLCDCS HUB | PLC Pioneer