Bently Nevada 330903-00-05-70-02-00 NSv Proximity Probe
Get a new and original Bently Nevada 330903-00-05-70-02-00 probe. This 3300 NSv probe measures machine vibration. It has a long 7.0 meter cable. It comes in factory sealed packaging. We provide a solid 12-month warranty. Ships fast via FedEx, UPS, or DHL.
What’s In The Box?
- One Bently Nevada 330903-00-05-70-02-00 proximity probe.
- Miniature coaxial ClickLoc connector attached.
- All original factory documentation.
- Protected in factory packing.
Understanding Your Model Code
Your part number 330903-00-05-70-02-00 is a custom build.
- 330903: The base probe type.
- -00-: Unthreaded section is 0 mm.
- -05-: Probe case is 50 mm long.
- 70: Cable is 7.0 meters long.
- 02: Has a ClickLoc connector.
- 00: Standard agency approval.
Key Technical Specifications
- Brand: Bently Nevada
- Full Model: 330903-00-05-70-02-00
- Measurement Range: 1.5 mm (60 mils)
- Best Gap to Target: 1.0 mm (40 mils)
- Output Sensitivity: 7.87 V/mm (200 mV/mil)
- System Accuracy: Better than ±0.06 mm
- Voltage Output: -1 Vdc to -13 Vdc
- Works With Shafts: Down to 8.9 mm diameter
- Probe Body: Strong 304 Stainless Steel
- Probe Tip: Tough PPS plastic
- Temperature Range: -52°C to +177°C
- Cable Bend Radius: More than 25.4 mm
Easy Installation Steps
- Screw the probe in by hand until finger tight.
- Use a wrench only if needed. Do not exceed 0.56 N•m.
- Connect the ClickLoc connector firmly.
- Keep the cable bends gentle.
- Set the gap to about 1.0 mm from the target.
Works With Your Old System
This new 3300 NSv probe fits old 3300 RAM systems. No need to change cables or hardware. It offers better chemical resistance for longer life.
5 Frequently Asked Questions
- What is the total length? The probe cable is 7.0 meters (23.0 feet) long.
- What is the probe tip made of? It is made of chemical-resistant PPS material.
- What connector does it use? It uses a secure Miniature coaxial ClickLoc connector.
- How accurate is the measurement? It is very accurate, with less than ±0.06 mm error.
- What is the minimum target size? The minimum target diameter is 8.9 mm.
Get The Full Manual
Need more details? Download the complete datasheet for all technical graphs and data.
© 2025 World of PLC Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Need Help? Email: info@oiltechcontrols.com or Call/WhatsApp: +86 158 8020 0923
Our Partners: PLCDCS HUB Limited https://plcdcshub.com/ | PLC Pioneer Limited https://plc-pioneer.com/
Reviews
There are no reviews yet.