Bently Nevada 3300 NSv Proximity Probe: Ready to Ship
Get a new and original 3300 NSv probe, part number 330904-00-12-10-01-CN. It comes in factory packing with a 12-month warranty. We ship fast via FedEx, UPS, and DHL.
Quick Overview
- Brand: Bently Nevada
- Model: 3300 NSv Proximity Probes
- Full Part Number: 330904-00-12-10-01-CN
- Condition: New & Original
- Warranty: 12 Months
Key Features
- M8x1 threaded case with armor for tough jobs.
- 120 mm overall case length.
- 1.0 meter total cable length.
- ClickLoc connector for easy setup.
- Great chemical resistance for compressors.
- Works with older 3300 RAM probe systems.
Detailed Technical Specs
- Linear Range: 0.25 mm to 1.75 mm
- Scale Factor: 7.87 V/mm (±12.5%/-20%)
- Output Signal: -1 to -13 Vdc
- Frequency Response: 0 to 10 kHz
- Probe Resistance (1.0m): 4.2 ± 0.5 ohms
- Operating Temp: -52°C to +177°C
- Case Material: 304 Stainless Steel
- Tip Material: PPS (Polyphenylene Sulfide)
- Min. Target Size: 13 mm diameter
- Bend Radius: 25.4 mm minimum
How to Install
- Gap Setting: 1.0 mm (40 mils) from target.
- Torque: Finger tight, max 0.56 N•m.
- Thread Engagement: Max 12 mm for M8x1 thread.
Compatibility Info
This 3300 NSv probe works with Bently Nevada’s 3300 RAM systems. You can use it as a direct replacement.
Approvals
This model has Country Specific Approvals (CN) for use in regulated markets.
What You Get
- One Bently Nevada 330904-00-12-10-01-CN Probe.
- All original factory documents.
- Full 12-month warranty support.
Frequently Asked Questions
1. What is the difference between the -12- and -15- case length options?
The -12- means a 120 mm long case. The -15- is 150 mm. Choose based on your mounting depth.
2. Can I use this probe for axial position measurement on a small shaft?
Yes, but for shafts under 13 mm, the scale factor may change. Reduce the gap to help with this.
3. What does the “CN” approval option mean?
It means the probe meets specific safety and quality rules for certain countries.
4. How does the Viton O-ring handle pressure?
It seals the probe tip from the case. The probe is not pressure tested before shipping. Contact us for high-pressure needs.
5. What is the maximum field wiring length I can use?
You can use up to 305 meters (1000 feet) of cable between the probe and the monitor.
Get the Full Manual
- Learn all about setup and specs.
- See graphs for performance data.
- Get detailed wiring diagrams.
Download the Datasheet PDF Here
© 2025 World of PLC Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Need Help? Email: info@oiltechcontrols.com | Phone/WhatsApp: +86 158 8020 0923
Our Partners: PLCDCS HUB Limited | PLC Pioneer Limited
Reviews
There are no reviews yet.