Bently Nevada 3300 NSv Proximity Probe
New 330904-00-10-70-01-05 in stock. Compact 100mm case with 7m standard cable. The 330904-00-10-70-01-05 works in dry areas. Perfect for general machine monitoring. Factory fresh with 12 month cover.
Model Number Guide
- 330904 – Base probe type
- 00 – All threads, no smooth part
- 10 – 100mm short case
- 70 – 7 meter cable length
- 01 – Standard cable type
- 05 – Safety certified
Technical Specs
- Range: 1.5 mm total
- Gap: 1.0 mm best setting
- Output: -1 to -13 VDC
- Error: ±0.06 mm maximum
- Response: 0 to 10,000 Hz
- Case: 100mm compact
- Cable: 7 meters standard
- Temp Range: -52°C to +177°C
- Resistance: 5.9 ohms ±0.9
- Thread: M8 x 1 mm
- Target: 13mm minimum size
- Sensitivity: 7.87 V/mm
- Bend Radius: 25.4 mm min
- Torque: Hand tight only
- Body: Stainless steel
- Tip: PPS plastic
- Seal: Viton O-ring
- Connector: ClickLoc type
Easy Setup
- Mount 1.0 mm from target
- Screw in fully by hand
- No tools needed
- Avoid sharp cable bends
- Use flat metal surface
- Test connection
System Fit
Works with 3300 RAM systems. Same electrical specs. Direct replacement.
Fast Delivery
We ship worldwide via FedEx, UPS, DHL. Quick processing. Tracking provided.
Warranty
12 month full coverage. Protection against defects.
Get Full Manual
Need installation help? Download guide here.
Expert Answers
- Where to use standard cable?
- Dry indoor areas. Normal factory conditions. No oil or chemicals.
- Why choose compact case?
- Fits tight spaces. Small machines. Limited clearance areas.
- How to verify proper operation?
- Check output voltage. Measure gap. Test signal quality.
- What maintenance needed?
- Annual gap check. Cable inspection. Connector cleaning.
- Can it monitor vibration?
- Yes, measures shaft vibration. Position changes. Machine health.
© 2025 World of PLC Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Support: info@oiltechcontrols.com | +86 158 8020 0923
Partners: PLCDCS HUB | PLC Pioneer
Reviews
There are no reviews yet.