Bently Nevada 330101-00-15-10-01-00 | 3300 XL 8mm Probe for Turbine Vibration

Product Overview

• Brand: Bently Nevada
• Part Number: 330101-00-15-10-01-00
• Type: 3300 XL 8mm Probe
• Origin: Made in U.S.A
• Thread: 3/8-24 UNF (without armor)

330101-00-15-10-01-00 Suffix Tree (Order Code Details)

• 330101
  • 00 → Unthreaded Length: 0.0 in
  • 15 → Case Length: 1.5 in
  • 10 → Total Cable Length: 1.0 m (3.3 ft)
  • 01 → ClickLoc Mini Coax Connector + Protector
  • 00 → No Agency Approval Required

Main Technical Numbers

• Nominal Probe DC Resistance: 7.59 Ω ± 0.50
• Extension Cable Capacitance: 69.9 pF/m typical
• Linear Range: 0.25 mm to 2.3 mm (10–90 mils)
• Recommended Gap Setting: -9 Vdc ≈ 1.27 mm (50 mils)
• Scale Factor: 7.87 V/mm (200 mV/mil)
• Deviation from Linearity: ±0.025 mm (standard system)
• Max Field Wiring Distance: 305 m (1,000 ft)

Materials & Mechanical Strength

• Probe Tip: PPS (Polyphenylene sulfide)
• Probe Case: AISI 303/304 Stainless Steel
• Pull Strength (CableLoc Design): 330 N (75 lbf)
• Seal Type: Viton® O-ring pressure seal
• Max Thread Engagement: 0.563 in

Temperature & Environment

• Standard Temp Range: -52°C to +177°C
• Extended Tip Range: up to +218°C
• Cable/Connector Range: up to +260°C
• Humidity Drift: <3% change at 93% RH (56 days)

Key Selling Points

• Strong PPS encapsulated coil for harsh sites
• TipLoc molding improves tip bonding life
• ClickLoc connector for quick safe install
• Works with 3300 XL 8mm Proximity Probe systems
• Best choice for turbine and compressor vibration

Warranty & Shipping

• Warranty: 12 Months (new and original)
• Shipping Methods: FedEx, UPS, DHL
• Worldwide export packing supported

Professional FAQ (Buying Guide)

• Q1: How do I confirm the correct cable length?
  A: Match the total probe + extension length to your monitor setup. This model is 1.0 m.
• Q2: When should I choose an 8 mm probe instead of 5 mm?
  A: Use 8 mm when you need higher strength and better resistance to physical damage.
• Q3: What is the best gap setting for stable vibration readings?
  A: A common field setting is -9 Vdc, around 1.27 mm from the target.
• Q4: Can this probe work in high heat areas?
  A: Yes. Standard is up to +177°C, and extended versions support hotter zones.
• Q5: What should I check before ordering?
  A: Confirm thread type (3/8-24 UNF), case length, cable length, and approval needs.

Contact Information

• Email: info@oiltechcontrols.com
• WhatsApp: +86 158 8020 0923

Copyright © 2026 Oiltech Controls Limited. All rights reserved.

Original Source: https://www.oiltechcontrols.com/

Partner PLCDCS HUB Limited
https://plcdcshub.com/.
All rights reserved.