Product Overview
The Bently Nevada 330101-00-40-10-11-05 is a high-performance
3300 XL 8mm Proximity Probe
designed for accurate vibration and position monitoring in harsh industrial environments.
It offers strong mechanical protection, stable signal output, and long service life.
Model Structure & Suffix Breakdown
330101
└─ 00 → Unthreaded Length: 0.0 inch
└─ 40 → Case Length: 4.0 inches
└─ 10 → Cable Length: 1.0 meter (3.3 ft)
└─ 11 → Miniature ClickLoc Connector + FluidLoc Cable
└─ 05 → CSA / ATEX / IECEx Certified
Key Product Advantages
- Robust PPS probe tip with thick coil encapsulation
- Stainless steel probe body for strong impact resistance
- Patented TipLoc molding improves tip-to-body strength
- CableLoc design provides 330 N (75 lbf) pull resistance
- FluidLoc cable prevents oil and fluid leakage
- Stable output in high vibration environments
Technical Highlights
- Probe Diameter: 8 mm
- Thread Type: 3/8-24 UNF
- Linear Measurement Range: 0.25 – 2.3 mm
- Recommended Gap: -9 Vdc (≈1.27 mm)
- Scale Factor: 7.87 V/mm (±5%)
- Probe Resistance (1 m): 7.59 Ω ±0.50
- Capacitance: 69.9 pF/m typical
- Max Field Wiring Length: 305 m
Environmental & Mechanical Ratings
- Operating Temperature: -52°C to +177°C
- Extended Tip Temperature: up to +218°C
- Cable Temperature Limit: +260°C
- Humidity Drift: <3% ASF at 93% RH
- Pressure Seal: Viton® O-ring
- Weight: 323 g/m
Applications
- Steam and gas turbines
- Compressors and pumps
- Motors and gearboxes
- Critical rotating machinery
Warranty & Logistics
- Warranty: 12 months
- Fast Shipping via FedEx / UPS / DHL
- Brand New & Factory Sealed
Professional FAQ
Q1: When should I choose an 8 mm probe?
Use 8 mm probes when vibration levels are high or physical damage is possible.
They are stronger than smaller probes.
Q2: Is this probe compatible with 3300 XL systems?
Yes. It is fully compatible with all Bently Nevada 3300 XL Proximitor sensors.
Q3: What is the benefit of FluidLoc cable?
FluidLoc blocks oil and liquids from traveling through the cable into instruments.
Q4: Can I use long field wiring?
Yes. Up to 305 meters is supported, but longer runs reduce high-frequency response.
Q5: How do I select the correct probe length?
Check your mounting depth and target gap. Choose cable and case length together.
Contact & Support
Email:
info@oiltechcontrols.com
WhatsApp:
+86 158 8020 0923
Copyright © 2025 Oiltech Controls Limited. All rights reserved.
Original Source:
https://www.oiltechcontrols.com/
Partner
PLCDCS HUB Limited.
All rights reserved.
Reviews
There are no reviews yet.