Product Introduction
The Bently Nevada 330101-00-96-20-02-CN belongs to the advanced 3300 XL series. This 8 mm proximity probe measures vibration and position in industrial machinery. Engineers trust this system for reliable condition monitoring. A patented TipLoc molding method bonds the probe tip to the body. A CableLoc design provides strong pull strength for the cable. This unit features a standard miniature coaxial ClickLoc connector. It delivers precise performance in harsh industrial environments.
Order Now and Download Manual
We keep this part in stock for fast delivery within 12 to 48 hours. We ship globally via FedEx, UPS, and DHL. Every unit includes a solid 12-month warranty.
Download the official Bently Nevada 330101-00-96-20-02-CN Manual to review complete wiring diagrams and setup instructions.
Configuration Breakdown and Suffix Details
- Manufacturer: Bently Nevada
- Product Model: 330101-00-96-20-02-CN
- Product Series: 3300 XL
- Probe Diameter: 8 mm
- Thread Size: 3/8-24 UNF
- Armor Option: Without armor
- Unthreaded Length Option: 00 (0.0 in)
- Overall Case Length Option: 96 (9.6 in)
- Total Length Option: 20 (2.0 meters / 6.6 feet)
- Connector and Cable Type Option: 02 (Miniature coaxial ClickLoc connector with standard cable)
- Country Specific Suffix: CN
Technical Data and Specifications
- Brand: Bently Nevada
- Model: 330101-00-96-20-02-CN
- Measurement Range: 2 mm (80 mils)
- Linear Range Span: From 0.25 mm to 2.3 mm (10 mils to 90 mils)
- Incremental Scale Factor: 7.87 V/mm (200 mV/mil)
- Frequency Response: Supports signal transmission up to 305 meters (1,000 feet)
- Sensitivity: High precision output across the full linear range
- Linearity (DSL): Less than ±0.025 mm (±1 mil) for standard 2-meter systems
- Resolution: High signal stability under dynamic vibration loads
- Temperature Range: -52°C to +177°C (-62°F to +350°F) for standard probe tips
- Environmental Tolerance: Withstands up to 93% relative humidity without performance loss
- Interference Resistance: Robust shielding protects against electromagnetic noise
- DC Resistance: 7.88 Ω nominal resistance from center to outer conductor
- Extension Cable Capacitance: 69.9 pF/m (21.3 pF/ft) typical
Installation, Calibration, and Maintenance
- Set the initial gap voltage to -9 Vdc for radial vibration monitoring.
- Use a 3-conductor shielded triad cable for field wiring connections.
- Keep total field wiring length under 305 meters to maintain signal integrity.
- Inspect the Viton O-ring seal periodically to prevent fluid leaks.
- Clean connector threads during routine maintenance to ensure secure electrical contact.
Compatibility and System Integration
- Compatible with standard 3300 XL Proximitor Sensors.
- Works seamlessly with industrial monitoring systems and vibration analyzers.
- Interchangeable with standard 2-meter system components without recalibration.
- Matches standard machine mounting brackets using 3/8-24 UNF threads.
Certifications, Compliance, and Package Contents
- Manufactured to meet strict quality standards in the U.S.A.
- Complies with IEC standard 68-2-3 for humidity resistance.
- Package includes one 330101-00-96-20-02-CN probe unit.
- Includes factory calibration data sheet and quality inspection report.
Industrial Applications and Suitable Equipment
- Steam Turbines: Monitors shaft vibration and axial position.
- Centrifugal Compressors: Detects rotor imbalance and bearing wear.
- Hydroelectric Generators: Tracks slow-speed shaft movement.
- Pumps and Fans: Ensures mechanical stability in continuous heavy-duty operations.
Frequently Asked Questions
- Question: What is the recommended gap voltage for this probe?
Answer: Set the initial gap to -9 Vdc, which equals approximately 1.27 mm (50 mils) from the target. - Question: Can I use this probe in high-humidity environments?
Answer: Yes. The probe shows less than a 3% change in average scale factor at 93% humidity. - Question: What type of field wiring should technicians use?
Answer: Use a 3-conductor shielded triad cable with tinned wire for best results. - Question: How do I select the right probe length for my machine?
Answer: Match the case length and total length to your bracket depth and proximity monitor distance. - Question: What causes premature failure of the probe pressure seal?
Answer: Exposing the probe tip to temperatures below -34°C can damage the Viton O-ring seal.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
All rights reserved.
Reviews
There are no reviews yet.