Bently Nevada 330171-00-08-10-02-CN 5mm Probe | 1 Meter Cable Hazardous Area

Overview

This is a Bently Nevada 5mm Proximity Probe. The model is 330171-00-08-10-02-CN. It provides precise vibration data. This helps protect expensive machinery from damage. It is built in the USA for high quality.

Key Features & Benefits

• Reliable Monitoring: Accurate measurement of shaft vibration and position.
• Rugged Build: Stainless steel case and PPS tip resist harsh environments.
• Easy Installation: Standard 1/4-28 UNF thread and ClickLoc connector.
• Safe for Hazardous Areas: Includes specific country agency approvals (CN option).
• Long Cable: 1.0 meter integrated cable offers flexible mounting.

Detailed Technical Data

• Product Identification
  • Manufacturer: Bently Nevada
  • Full Part Number: 330171-00-08-10-02-CN
    • Base Model: 330171 (5mm Probe)
    • Unthreaded Length: 00 (0.0 inch)
    • Case Length: 08 (0.8 inch)
    • Total Length: 10 (1.0 meter)
    • Connector: 02 (Miniature Coaxial ClickLoc)
    • Agency: CN (Country Specific Approval)
• Electrical Specifications
  • Operating Voltage: -17.5 VDC to -26 VDC
  • Max Current: 12 mA
  • Output Impedance: 50 Ω
  • Probe DC Resistance (1.0m): 7.59 Ω ± 0.50
  • Power Supply Sensitivity: Excellent (< 2 mV/V)
• Mechanical & Physical Specs
  • Probe Diameter: 5 mm
  • Case Thread: 1/4-28 UNF
  • Max Thread Engagement: 0.375 inch
  • Case Material: AISI 304 Stainless Steel
  • Tip Material: Polyphenylene Sulfide (PPS)
  • Recommended Case Torque: 5.1 N·m (45 in-lb)
  • Cable Type: 75 Ω Triaxial with FEP insulation
  • Cable Length: 1.0 meter (integrated)
• Environmental Limits
  • Operating Temperature: -35°C to +177°C
  • High Magnetic Field Immunity: Tested at 60 Hz, 300 Gauss
  • Minimum Cable Bend Radius: 25.4 mm (1.0 inch)
  • High Tensile Strength: 222 N (50 lbf) at connections
  • Hazardous Area Certifications: EPL Ga/Gc & Dc Ratings

Setup & Installation Notes

• Use a #3 or larger drill for the mounting hole.
• Do not engage more than 0.375″ of thread into the hole.
• Tighten the probe case to 45 in-lbs. Never exceed 65 in-lbs.
• Connect the cable by hand. The ClickLoc will snap into place.
• Keep the cable bend radius over 1 inch.
• Set the initial gap to 50 mils (1.27 mm) from the target shaft.

Ordering & Support Information

• Warranty: This product is covered by a 12-month warranty.
• Shipping: We ship worldwide using FedEx, UPS, and DHL.
• Package Includes: One Bently Nevada probe, part number 330171-00-08-10-02-CN.
• Need Help? Contact our experts for technical support or configuration questions.
  • Email: info@oiltechcontrols.com
  • WhatsApp: +86 158 8020 0923

Expert FAQs

What does the “CN” suffix mean in the model number?

It means this probe has specific agency approvals for use in certain countries. Always check if this approval matches your local safety requirements.

Can I cut or extend the 1-meter cable?

No. Do not cut the integrated cable. Use approved Bently Nevada extension cables if you need more length.

Is this probe good for high-temperature applications?

Yes. The probe works up to 177°C (351°F). Check the temperature classification chart for hazardous area limits.

How does magnetic field immunity benefit me?

It means the signal stays stable near large motors or generators. This prevents false vibration readings.

I need a different cable length. Can you provide it?

Yes. The 330171 base model comes in various lengths. Contact us with your required cable length and connector type.

Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Partner: PLCDCS HUB Limited
Powergear X Automation Limited
All rights reserved.