Bently Nevada 330173-00-04-10-02-00 3300 5mm Probe M8 Sensor

Precision Metric Probe Overview

• Bently Nevada 330173-00-04-10-02-00 is a metric vibration probe.
• It is part of the 3300 5mm Proximity Probes series.
• The M8 thread supports metric machine designs.
• The 40 mm case allows compact mounting.
• It delivers stable shaft position signals.
• Engineered for precise rotating equipment control.

Suffix Architecture Map

• 330173 Code Layout
  • 00
    • No unthreaded length
  • 04
    • 40 mm probe body
  • 10
    • 1.0 meter cable
  • 02
    • Mini ClickLoc connector
  • 00
    • No special approval required

Key Electrical and Physical Metrics

• Brand: Bently Nevada
• Model: 330173-00-04-10-02-00
• Sensing method: Eddy current technology
• Reference gap: 1.27 mm calibrated spacing
• Operating supply: -17.5 to -26 Vdc
• Nominal supply: -24 Vdc
• Current load: up to 12 mA
• Output impedance: 50 Ω
• Probe resistance: 7.59 ± 0.50 Ω
• Voltage drift: less than 2 mV per volt
• Signal bandwidth suits high speed rotors
• Magnetic immunity: up to 300 Gauss
• Operating temperature: -35°C to +177°C
• Thread type: M8 x 1 metric
• Max thread engagement: 12 mm
• Cable type: 75 Ω FEP insulated triaxial
• Minimum bend radius: 25.4 mm
• Case material: AISI 304 stainless steel
• Tip material: PPS polymer
• Tensile rating: 222 N pull strength
• Weight: 0.323 kg

Mounting and Handling Guide

• Align probe tip with target surface.
• Respect the 12 mm thread limit.
• Apply 5.1 N·m recommended torque.
• Never exceed 7.3 N·m torque.
• Route cable with smooth curves.

Operational Value Highlights

• Enables accurate early vibration alerts.
• Maintains signal stability in heat.
• Supports continuous industrial duty.
• Helps extend machine service life.
• Reduces unplanned shutdown risk.

Package Content and Warranty

• 1 × original proximity probe
• Connector protection accessory
• Factory sealed packing
• 12 month product warranty
• Delivery by FedEx, UPS, or DHL

Expert FAQ and Buying Guidance

• Why choose an M8 thread probe
• It fits metric equipment without adapters.
• Can I extend the cable length later
• Use approved extension cables only.
• What surface works best for sensing
• Clean steel targets give best accuracy.
• How do I protect the connector
• Keep it covered during installation.
• What should buyers verify first
• Confirm thread type and cable reach.

Contact and Ordering Support

• Email: info@oiltechcontrols.com
• WhatsApp: +86 158 8020 0923

• Copyright © 2026 Oiltech Controls Limited. All rights reserved.
• Original Source: https://www.oiltechcontrols.com/
• Partner PLCDCS HUB Limited https://plcdcshub.com/. All rights reserved.
• Powergear X Automation Limited https://www.powergearx.com/