Quick Identification
- Manufacturer: Bently Nevada
- Part Number: 330702-00-26-50-11-00
- Series: 3300 XL
- Probe Diameter: 11 mm
- Made In: U.S.A
Design Focus
- Built for long-distance installations
- FluidLoc cable reduces oil migration
- Connector protector improves durability
- Armored body resists mechanical stress
- Stable output in harsh conditions
Ordering Code Logic
- 330702
- 3300 XL proximity probe
- 11 mm sensing face
- 1/2-20 UNF mounting thread
- Stainless steel armor
- 00
- Unthreaded length: 0.0 inch
- 26
- Overall case length: 2.6 inch
- 50
- Total probe length: 5.0 meters
- Use only with 5 m Proximitor
- 11
- Miniature ClickLoc connector
- Connector protector included
- FluidLoc cable type
- 00
- No agency approval required
Electrical Performance
- Probe Resistance: 7.2 Ω ±0.8
- Cable Impedance: 75 Ω triaxial
- Signal Type: Low-noise analog
- Compatibility: 3300 XL Proximitor systems
Mechanical Construction
- Tip Material: PPS
- Case Material: AISI 304 stainless steel
- Seal Design: Viton O-ring
- Minimum Bend Radius: 25.4 mm
- Shipping Weight: 0.17 kg
Mounting & Torque Limits
- Case Thread: 1/2-20 UNF
- Max Thread Engagement: 0.750 inch
- Recommended Torque: 15.2 N·m
- Maximum Torque: 45.2 N·m
- Connector Torque: Finger tight
Temperature & Area Ratings
- Operating Temperature: -52°C to +177°C
- Storage Temperature: -52°C to +177°C
- Low Temperature Warning: Avoid below -34°C
- Hazard Ratings: EPL Ga, Gc, Dc
Common Application Areas
- Large rotating machines
- Oil and gas compressors
- Steam and gas turbines
- Generators and motors
- High-oil environments
Professional FAQ
What is the role of the connector protector?
It reduces damage during handling and service.
Can this probe replace a non-FluidLoc version?
Yes, if the Proximitor length matches.
Is this probe suitable for wet areas?
Yes. FluidLoc cable limits fluid ingress.
Does lack of approval affect performance?
No. It only affects certification needs.
How do I select the right probe length?
Match probe length to Proximitor cable length.
Warranty & Shipping
- Warranty: 12 months
- Shipping Methods: FedEx, UPS, DHL
- Secure industrial packaging
Contact Information
- Email: info@oiltechcontrols.com
- WhatsApp: +86 158 8020 0923
Copyright © 2025 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Partner
PLCDCS HUB Limited.
All rights reserved.
Andrew Collins –
This proximity probe was installed on a rotating asset in a chemical processing facility. The item was received in new condition and properly packaged. After installation, the probe produced stable and repeatable measurements within the expected range. OilTech Controls provided order confirmation and shipping updates promptly. The probe integrated with our existing Bently Nevada monitoring setup without compatibility issues. No problems observed during initial operation.