Product Overview
Bently Nevada 330702-00-26-90-02-05 is a high-precision proximity probe.
It belongs to the trusted 3300 XL 11 mm series.
The probe is built for long-term shaft vibration and position monitoring.
Manufactured in U.S.A. with proven field reliability.
Core Selling Points
- Stable signal for critical rotating equipment.
- Armored cable resists oil, moisture, and wear.
- Wide temperature range for harsh sites.
- Accurate gap measurement with low drift.
- Fits standard Bently Nevada monitor systems.
Suffix Configuration (Tree View)
- 330702
- 3300 XL 11 mm probe
- 1/2-20 UNF thread
- Stainless steel armored design
- -00
- Unthreaded length: 0 in
- -26
- Probe case length: 2.6 in
- -90
- Total cable length: 9.0 m
- -02
- Miniature ClickLoc connector
- Standard coaxial cable
- -05
- Multiple agency approvals
Technical Highlights
- Probe diameter: 11 mm
- Thread size: 1/2-20 UNF
- Probe tip material: PPS
- Probe case material: AISI 304 SST
- Cable type: 75 Ω triaxial
- Cable insulation: FEP
- Total cable length: 9 meters
- DC resistance: 8.5 ± 1.1 ohms
- Minimum bend radius: 25.4 mm
- Shipping weight: 0.17 kg
Environmental and Mechanical Limits
- Operating temperature: -52°C to +177°C
- Storage temperature: -52°C to +177°C
- Pressure sealing: Viton O-ring
- Not pressure tested by default
- Low-temperature exposure may affect seal life
Torque and Installation Data
- Recommended probe torque: 15.2 N·m
- Maximum probe torque: 45.2 N·m
- Connector torque: finger tight
- Max connector torque: 0.565 N·m
- Thread engagement max: 0.750 in
Application Scenarios
- Steam and gas turbines
- Compressors and pumps
- Motors and generators
- Shaft vibration monitoring
- Axial position measurement
Warranty and Logistics
- Warranty period: 12 months
- Global shipping via FedEx, UPS, DHL
- Export-safe industrial packaging
Professional FAQ
- Is this probe compatible with older 3300 systems?
- Yes. It supports legacy and upgraded 3300 XL monitors.
- Can this probe handle oil immersion?
- Yes. The armored cable and PPS tip resist oil exposure.
- How to choose between 5 m and 9 m cable?
- Select based on cabinet distance and routing margin.
- Is calibration required after installation?
- System calibration is recommended for best accuracy.
- When should pressure testing be requested?
- Request testing for high-pressure or sealed housings.
Contact Information:
info@oiltechcontrols.com |
+86 158 8020 0923
Copyright © 2025 Oiltech Controls Limited. All rights reserved.
Original Source:
https://www.oiltechcontrols.com/
Partner
PLCDCS HUB Limited. All rights reserved.
Reviews
There are no reviews yet.