Product Overview
- Manufacturer: Bently Nevada
- Model: 330702-00-26-90-11-00
- Series: 3300 XL
- Origin: Made in U.S.A
- Designed for precise non-contact shaft monitoring
- Ideal for heavy-duty rotating equipment
Design Structure
- Probe Type
- 3300 XL 11 mm proximity probe
- Armored stainless steel housing
- Mechanical Interface
- Thread: 1/2-20 UNF
- Unthreaded length: 0 in
- Case length: 2.6 in
- Cable Assembly
- Total length: 9.0 m
- FluidLoc FEP insulated cable
- 75 ohm triaxial construction
Key Technical Data
- Probe DC resistance: 8.5 Ω ± 1.1
- Minimum bend radius: 25.4 mm
- Shipping weight: 0.17 kg
- Recommended case torque: 15.2 N·m
- Maximum rated torque: 45.2 N·m
Materials and Protection
- Probe tip
- Polyphenylene sulfide material
- High wear resistance
- Probe body
- AISI 304 stainless steel
- Corrosion resistant surface
- Pressure sealing
- Viton O-ring design
- Supports differential pressure sealing
Thermal and Environmental Limits
- Operating temperature
- -52°C to +177°C
- Storage temperature
- -52°C to +177°C
- Low temperature note
- Avoid exposure below -34°C
- Protects pressure seal life
Compatibility Notes
- Works with 3300 XL Proximitor sensors
- Suitable for long-distance installations
- Complements systems using 3300 XL 8mm Probe
Installation Insights
- Ensure correct thread engagement depth
- Use finger-tight connector torque
- Avoid sharp cable bends near the probe
- Verify cable routing before power-up
Operational Advantages
- Stable output over long cable runs
- High resistance to oil and chemicals
- Low signal loss with triaxial cable
- Supports predictive maintenance programs
Typical Applications
- Steam turbines
- Gas compressors
- Large electric motors
- Critical pump trains
Warranty and Logistics
- Warranty period: 12 months
- Shipping options: FedEx, UPS, DHL
- Export-safe industrial packaging
FAQ
- What makes the 11 mm probe suitable for harsh sites?
- The armored body and FEP cable resist oil, heat, and vibration.
- Can this probe replace shorter cable versions?
- Yes, if the Proximitor supports a 9 m probe.
- How does this 330702-00-26-90-11-00 compare to 8 mm probes?
- It offers a wider sensing face and higher tolerance.
- Is special calibration required?
- No, standard gap setup is sufficient.
- What should buyers confirm before ordering?
- Check thread size, cable length, and system compatibility.
Contact Information
- Email: info@oiltechcontrols.com
- Phone: +86 158 8020 0923
Copyright © 2025 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Partner
PLCDCS HUB Limited.
All rights reserved.
Reviews
There are no reviews yet.