Bently Nevada 330702-00-30-10-12-00 3300 XL 11mm Probe 1m Armored

Quick Product Snapshot

• Brand: Bently Nevada
• Part No.: 330702-00-30-10-12-00
• Series: 3300 XL 11mm Proximity Probe
• Build: Armored industrial probe
• Thread: 1/2-20 UNF
• Cable length: 1.0 meter
• Connector: ClickLoc + FluidLoc
• Made in U.S.A

Model Code — Structured Breakdown

• 330702
  • Base model family
  • 3300 XL 11mm Probe
  • Armored cable design
• 00
  • Unthreaded length: 0.0 in
• 30
  • Case length: 3.0 in
  • Compact housing
• 10
  • Total cable: 1.0 m
  • Short run install
• 12
  • Mini ClickLoc connector
  • FluidLoc sealed cable
• 00
  • No agency approval

Core Electrical Data

• Cable type: 75 Ω triaxial
• Insulation: FEP high temp
• Probe resistance (1 m): 5.9 ± 0.5 Ω
• Low noise output
• Fast dynamic response
• Stable long term drift

Mechanical And Material

• Tip material: PPS
• Case: AISI 304 stainless steel
• Seal: Viton O-ring
• Armor: stainless braid
• Shock resistant build
• Oil and fluid resistant

Thread And Mount Limits

• Main thread: 1/2-20 UNF
• Alt thread: M16 × 1.5
• Thread engage max: 0.750 in
• M16 engage: 24 mm
• Min bend radius: 25.4 mm
• Short body for tight space

Torque Guide

• Case max torque: 45.2 N·m
• Case best torque: 15.2 N·m
• Connector: finger tight
• Connector max: 0.565 N·m
• Avoid over force install

Temperature Class Range

• Operating: −52°C to +177°C
• Storage: same range
• Below −34°C seal risk
• T1 up to +232°C
• T3 up to +120°C
• T5 up to +40°C
• EPL Ga / Gc / Dc class

Application Advantages

• Good for short cable runs
• Better signal margin
• Fast swap ClickLoc head
• FluidLoc for wet zones
• Armor for harsh sites
• Fit turbine and compressor
• Works with matched drivers

Warranty And Logistics

• Warranty: 12 months
• New and original unit
• Individually packed
• Courier: FedEx
• Courier: UPS
• Courier: DHL

FAQ — Field Experience Tips

• Is 1m probe easier for signal quality
• Yes. Short cable gives lower loss.
• Can I extend this probe cable
• No. Use correct factory length.
• When should I pick armored type
• Use it near moving parts.
• Does FluidLoc matter in dry area
• Not required but safer.
• What is a common install mistake
• Wrong gap setting at start.

Contact Information

• Email: info@oiltechcontrols.com
• WhatsApp: +86 158 8020 0923

Copyright © 2026 Oiltech Controls Limited. All rights reserved.

Original Source: https://www.oiltechcontrols.com/

Partner PLCDCS HUB Limited . All rights reserved.

Powergear X Automation Limited