Quick Overview
This is the Bently Nevada 330707-00-20-90-01-05. It is an 11mm 3300 XL Proximity Probe with extra safety features. It has a connector protector and holds multiple agency approvals. Perfect for certified plants.
Why Choose This Probe?
- Factory Certified: Comes with multiple agency approvals for regulated sites.
- Protected Connection: ClickLoc connector has a built-in protector for safety.
- Proven Reliability: Made in the USA with high-quality materials.
- Easy Compliance: Simplifies documentation for safety audits.
- Long Cable: 9-meter length allows flexible installation.
Complete Specification List
- Brand: Bently Nevada
- Full Part Number: 330707-00-20-90-01-05
- System: 3300 XL Vibration Monitoring
- Probe Diameter: 11 mm
- Case Material: 304 Stainless Steel
- Tip Material: PPS (Polyphenylene Sulfide)
- Mounting Thread: 5/8-18 UNF
- Case Length: 2.0 inches
- Cable Length: 9.0 meters (29.5 ft)
- Cable Type: 75-ohm, FEP Insulated
- Connector: Miniature Coaxial ClickLoc with Protector
- DC Resistance: 8.5 ohms ± 1.1
- Temp Range (Op/Store): -51°C to +177°C
- Safe Install Temp: > -34°C
- Seal Material: Viton O-ring
- Min Bend Radius: 25.4 mm (1 inch)
- Weight: 0.17 kg
Understanding Your Part Number: 330707-00-20-90-01-05
- ▸ 330707 – 11mm Probe, 5/8-18 UNF Thread
- • 00 : Unthreaded Section = 0 inches
- • 20 : Case Length = 2.0 inches
- • 90 : Total Length = 9.0 meters
- • 01 : Connector = ClickLoc with Protector
- • 05 : Approvals = Multiple Agency
Handling & Setup Info
- Torque the probe case to 15.2 N·m (133 in·lb). Do not exceed 45.2 N·m.
- Hand-tighten the connector. Never use tools on the connector.
- Install only when temperature is above -34°C to protect the seal.
- The probe seals against pressure difference. It is not pressure tested.
- Route cable carefully. Avoid sharp bends under 1 inch radius.
Order & Delivery Details
- In the Box: One (1) probe, ready for installation.
- Our Promise: 12-month quality warranty on all probes.
- Fast Delivery: Shipped worldwide via FedEx, UPS, or DHL.
How to Select the Right Model
Pick 330707-00-20-90-01-05 if you need:
- A probe with official agency approvals (suffix -05).
- The added safety of a connector protector (suffix -01).
- The standard 9-meter cable length for most installations.
- To meet strict site safety and documentation requirements.
If approvals are not needed, a standard model may save cost.
Expert Questions & Answers
What does “Multiple Agency Approvals” (suffix -05) mean for this probe?
It means this probe model is certified by various international safety and standards bodies. This is often required for use in regulated industries like oil & gas, power generation, or chemical plants to comply with local and global codes.
What is the purpose of the connector protector (suffix -01)?
The plastic protector snaps over the ClickLoc connector. It prevents accidental disconnection from vibration. It also protects the electrical contacts from dust, moisture, and physical damage during operation.
Can I use this approved probe to replace a non-approved probe?
Yes, physically and electrically it is a direct replacement. Using an approved probe where one was not required is fine. It often helps during future plant audits or if safety standards are upgraded.
How should I store this probe before installation?
Keep it in its original packaging in a dry place. Avoid extreme temperatures, especially below -34°C. Do not bend the cable tightly or let the connector tip touch contaminated surfaces.
From a maintenance view, what’s the key advantage of the -01 connector type?
The protector makes the connection more robust in dirty or high-vibration areas. It reduces failures caused by connectors working loose or getting contaminated, which is a common field issue.
Need help with this 3300 XL 11mm Probe? Get in touch.
Email us at: info@oiltechcontrols.com
Call/WhatsApp: +86 158 8020 0923
Copyright © 2025 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Partner: PLCDCS HUB Limited. All rights reserved.
Reviews
There are no reviews yet.