Quick Product Overview
- Manufacturer: Bently Nevada
- Part Number: 330707-00-25-50-01-00
- Series: 3300 XL 11mm Proximity Probe
- Category: Proximity vibration sensor
- Origin: Made in U.S.A
- Design: Armored probe with connector protector
- Use: Shaft vibration and position check
Model Code Tree Breakdown
- 330707
- Base type: 3300 XL 11mm Probe
- Thread: 1/2-20 UNF
- With armor jacket
- 00
- Unthreaded length: 0 in
- 25
- Case length: 2.5 in
- 50
- Total length: 5.0 m
- Must match 5 m driver
- 01
- Mini ClickLoc connector
- With connector protector
- Standard cable type
- 00
- No agency approval
Core Technical Data
- Probe tip: PPS material
- Case: AISI 304 stainless steel
- Cable: 75 Ω triaxial
- Insulation: FEP
- Standard lengths: 1 m, 5 m, 9 m
- 5 m resistance: 7.2 Ω ± 0.8 Ω
- Gold plated brass parts inside
- High EMI noise immunity
Mechanical And Torque Limits
- Thread type: 1/2-20 UNF
- Alt metric thread: M16 x 1.5
- Max thread engage: 0.750 in
- Metric engage: 24 mm
- Max torque: 45.2 N·m
- Recommended torque: 15.0 N·m
- Connector torque max: 0.565 N·m
- Connector torque: finger tight
- Min bend radius: 25.4 mm
Temperature And Seal Performance
- Work temp: -52°C to +177°C
- Storage temp: same range
- Low temp risk below -34°C
- Seal type: Viton O-ring
- Differential pressure sealed
- Pressure test optional
Hazardous Area Temperature Class
- T1 class: up to +232°C ambient
- T2 class: up to +177°C ambient
- T3 class: up to +120°C ambient
- T4 class: up to +80°C ambient
- T5 class: up to +40°C ambient
- Dc class ranges also supported
Key Selling Points
- Stable vibration signal output
- Strong armored cable design
- Connector protector included
- Fast ClickLoc install
- High heat tolerance
- Good oil and fluid resistance
- Long service life in field
Warranty And Logistics
- Warranty: 12 months
- Condition: New and original
- Each unit inspected
- Shipping by FedEx
- Shipping by UPS
- Shipping by DHL
FAQ And Selection Help
- Can I use this 5 m probe with 9 m driver
- No. Probe and driver length must match.
- What is benefit of connector protector
- It reduces plug damage and fluid entry risk.
- Is armor always needed
- Use armor near rotating parts or sharp edges.
- How to avoid seal failure
- Do not run below low temp limit.
- What should I confirm before order
- Check thread, length, and connector code.
Contact And Quote
- Email: info@oiltechcontrols.com
- WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Partner PLCDCS HUB Limited . All rights reserved.
Reviews
There are no reviews yet.