Bently Nevada 330707-00-25-50-12-00 3300 XL 11mm Probe Sensor USA

Product Snapshot

• Brand: Bently Nevada
• Model: 3300 XL 11mm Proximity Probe
• Part Number: 330707-00-25-50-12-00
• Series: 3300 XL 11mm Probe
• Origin: Made in U.S.A
• Probe type: Armored proximity probe
• Shipping weight: about 0.17 kg

Order Code Tree Structure

• 330707
  • 3300 XL 11 mm probe
  • 1/2-20 UNF thread
  • With stainless armor
• -00
  • Unthreaded length: 0 inch
• -25
  • Case length: 2.5 inch
• -50
  • Total cable: 5.0 m
  • Use with 5 m driver only
• -12
  • Mini coax ClickLoc connector
  • FluidLoc cable
• -00
  • No agency approval required

Material And Construction

• Tip material: PPS
• Case material: AISI 304 stainless steel
• Cable: 75 Ω triaxial
• Insulation: FEP
• Armor: Stainless braid layer
• Seal: Viton O-ring
• Good oil and chemical resistance

Mechanical Limits

• Thread: 1/2-20 UNF
• Optional thread: M16 x 1.5
• Max thread engage: 0.750 in
• Metric engage: 24 mm
• Max case torque: 45.2 N·m
• Recommended torque: 15.2 N·m
• Connector torque max: 0.565 N·m
• Connector torque: finger tight
• Minimum bend radius: 25.4 mm

Electrical Characteristics

• Probe length: 5.0 m
• DC resistance: 7.2 Ω ± 0.8 Ω
• Stable impedance match
• Low signal loss path
• Strong noise shield
• Fast response to shaft motion

Temperature And Environment

• Operating temp: -52°C to +177°C
• Storage temp: same range
• Below -34°C may damage seal
• Sealed against process pressure
• Pressure test available by request
• Fit for turbine and compressor duty

Key Application Advantages

• Accurate shaft vibration reading
• Stable gap measurement output
• Armored cable for harsh zones
• Quick connect ClickLoc plug
• Long service life design
• Easy field replacement
• Works with XL sensor systems

Warranty And Delivery

• Warranty: 12 months
• New and original packing
• Each unit tested before shipping
• Courier: FedEx
• Courier: UPS
• Courier: DHL

FAQ And Buying Tips

• How do I select correct probe length
• Match probe and driver length exactly. Do not mix lengths.
• When should I choose armored type
• Use armor where cable may rub or vibrate.
• What causes unstable signal
• Wrong gap or wrong driver length often causes it.
• Can I bend cable near probe tip
• Avoid tight bends near tip. Keep safe radius.
• Is pressure test needed for all orders
• Only for special high pressure jobs. Ask before buy.

Contact And Quote Support

• Email: info@oiltechcontrols.com
• WhatsApp: +86 158 8020 0923

Copyright © 2026 Oiltech Controls Limited. All rights reserved.

Original Source: https://www.oiltechcontrols.com/

Partner PLCDCS HUB Limited . All rights reserved.

Powergear X Automation Limited