Bently Nevada 330904-08-10-05-02-05 3300 NSv Proximity Probe

Bently Nevada 3300 NSv Proximity Probe

Get the new Bently Nevada 330904-08-10-05-02-05 proximity probe. This 3300 NSv model is original and ships in its factory box. It offers reliable vibration and position measurement. The probe fits perfectly in 3300 RAM systems. It provides superior performance and chemical resistance.

Download the complete product datasheet for detailed specs.

Model Number Breakdown

• 330904: Base model with M8X1 thread and armor
• -08-: 80 mm unthreaded section
• -10-: 100 mm total case length
• -05: 0.5 meter cable length
• -02: Standard cable with ClickLoc connector
• -05: Carries multiple agency approvals

Core Technical Specifications

• Brand: Bently Nevada
• Model: 330904-08-10-05-02-05
• Measurement Range: 1.5 mm (60 mils)
• Sensitivity (Scale Factor): 7.87 V/mm (200 mV/mil)
• Frequency Response: 0 to 10 kHz
• Linearity (DSL): Better than ±0.06 mm
• Operating Temperature: -52°C to +177°C
• Output Signal: -1 Vdc to -13 Vdc
• Probe Resistance: 4.0 ± 0.5 ohms

Physical & Environmental Details

• Case Material: AISI 304 Stainless Steel
• Tip Material: PPS for chemical resistance
• Cable Type: 75-ohm coaxial with FEP insulation
• Sealing: Viton O-ring for pressure differentials
• Minimum Bend Radius: 25.4 mm (1.0 inch)

Installation Instructions

• Set the recommended gap to 1.0 mm (40 mils).
• Use finger tight plus a tool. Maximum torque is 7.3 N•m.
• Ensure maximum thread engagement of 12 mm for M8x1.
• Use a target diameter of at least 13 mm for best results.

Package Includes

• One Bently Nevada 330904-08-10-05-02-05 probe.
• All items are in original factory packaging.

We ship globally using FedEx, UPS, and DHL.

Frequently Asked Questions

• What makes the 3300 NSv probe special?
• It has better chemical resistance than older models. It also gives more accurate side-view measurements.
• Can I use this to replace an old 3300 RAM probe?
• Yes. The 3300 NSv probe works with all 3300 RAM system parts. It is a direct upgrade.
• What is the best way to set the gap?
• We recommend a 1.0 mm gap between the probe tip and the target shaft.
• How long can the cable be?
• You can use field wiring up to 305 meters long without signal problems.

Contact Our Technical Team

Email: info@oiltechcontrols.com

WhatsApp: +86 158 8020 0923

Our Partners

PLCDCS HUB Limited: https://plcdcshub.com/

PLC Pioneer Limited: https://plc-pioneer.com/

© 2025 World of PLC Limited. All rights reserved.

Original Source: https://www.oiltechcontrols.com/