Bently Nevada 330910-00-11-10-02-05 3300 NSv Probe M10X1 1m

330910-00-11-10-02-05 | Industrial Position Monitoring Solution

• Brand: Bently Nevada
• Part Number: 330910-00-11-10-02-05
• Series: 3300 NSv Proximity Probes
• Thread Type: M10X1
• Total Length: 1.0 meter
• Approval: Multiple Approvals
• Warranty: 12 Months

• This probe measures shaft displacement.
• It supports vibration and axial position detection.
• It resists oil, gas, and chemicals.
• It fits narrow mounting locations.
• It works in high temperature zones.

Configuration Structure

• 330910
  • NSv probe body
  • M10X1 threaded case
  • Armored cable design
• -00
  • No unthreaded length
• -11
  • 110 mm case length
• -10
  • 1.0 meter total probe length
• -02
  • Mini ClickLoc connector
  • Standard coaxial cable
• -05
  • Multiple agency approvals

Core Technical Data

• Linear Measurement Range: 0.25 to 1.75 mm
• Total Linear Span: 1.5 mm
• Output Scale Factor: 7.87 V/mm
• Scale Error: +12.5% / -20%
• Linearity Deviation: ±0.06 mm
• Frequency Bandwidth: 0 to 10 kHz
• Recommended Gap: 1.0 mm
• Probe Resistance: 4.2 ±0.5 Ω
• Cable Resistance: 0.220 Ω/m center
• Cable Shield Resistance: 0.066 Ω/m
• Cable Capacitance: 69.9 pF/m
• Impedance: 75 Ω
• Operating Temperature: -52°C to +177°C
• Storage Temperature: -52°C to +177°C
• Maximum Wiring Distance: 305 meters
• Minimum Target Size: 8.9 mm
• Recommended Target Size: 13 mm
• Bend Radius: 25.4 mm minimum
• Case Material: AISI 304 stainless steel
• Tip Material: PPS
• Cable Insulation: FEP

Operational Advantages

• Stable signal over long cable runs.
• Low noise design.
• High resistance to oil mist.
• Strong vibration tolerance.
• Reliable output in compressor systems.
• Supports hazardous area temperature classes.

Installation Notes

• Set gap at 1.0 mm.
• Use finger tight for alignment.
• Recommended full torque 11.3 N·m.
• Maximum torque 33.9 N·m.
• Use shielded triad wiring.

Application Areas

• Centrifugal compressors.
• Steam turbines.
• Gas compressors.
• Pumps and rotating shafts.
• Process industry machinery.

What You Receive

• 1 × 330910-00-11-10-02-05 probe
• Original factory packaging
• Product identification label
• 12-month warranty coverage

Shipping Options

• FedEx international express
• UPS global service
• DHL worldwide express

Professional FAQ

• How does this probe handle small shaft diameters?
• Small shafts may change scale factor. Reduce gap slightly to improve accuracy.

• Is armored cable necessary?
• Armored cable improves durability in high vibration areas.

• What happens if wiring exceeds 305 meters?
• Signal loss increases at high frequency. Keep within limit.

• How to confirm compatibility with monitor?
• Check NSv Proximitor sensor type before purchase.

• What should I confirm before ordering?
• Confirm thread type, total length, approval class, and temperature rating.

Contact Information

• Email: info@oiltechcontrols.com
• WhatsApp: +86 158 8020 0923

Copyright © 2026 Oiltech Controls Limited. All rights reserved.

Original Source: https://www.oiltechcontrols.com/

Partner PLCDCS HUB Limited. All rights reserved.
Powergear X Automation Limited