Honeywell XNX-AMSV-RNCB1 Transmitter – MPD Sensor 0-100% LEL HART Relays

Honeywell XNX-AMSV-RNCB1 Universal Transmitter with MPD Catalytic Sensor

Designed for harsh industrial environments. The XNX-AMSV-RNCB1 delivers reliable 0-100%LEL combustible gas detection. Combines a robust 316SS housing, HART® over 4-20mA output, and three fault/alarm relays.

Technical Specifications

Performance & Environment

• Range: 0-100% LEL (methane equivalent)
• Response: T90 < 8 seconds
• Sensitivity: 1% LEL (typical)
• Linearity: ±2% full scale
• Resolution: 0.1% LEL
• Temperature: -40°C to +65°C
• Humidity: 0-95% RH non-condensing
• Immunity: RFI/EMI protected (10 V/m)

Installation & Maintenance

• Mounting: Wall or pipe mount via M25 entries
• Wiring: 4-20 mA loop with HART® connection
• Calibration: Simple one-person magnetic or HART®
• Diagnostics: Continuous self-test with fault relay
• Maintenance: Sensor replacement without rewiring

Compatibility & Certifications

• HART® 7 over 4-20mA for remote configuration
• ATEX / IECEx / INMETRO approved for Zone 1/2
• Works with Sensepoint and Model 705 sensors
• Compatible with Modicon Quantum and other PLC systems

Diagnostic Capabilities

• Real-time sensor health monitoring
• Fault relay for device or wiring failures
• HART® provides predictive maintenance data
• On-board event log (last 50 events)

Typical Applications

• Oil & gas platforms – LEL monitoring
• Chemical plants – flammable gas detection
• Refineries – area monitoring
• Wastewater treatment – methane safety
• Pharmaceutical – solvent vapor control

Package Contents

• XNX transmitter with factory-mounted MPD sensor
• Hardware kit for M25 entries
• Quick start guide & certificate of conformity
• 12-month warranty card

FAQ – Quick Answers

• Can I change the sensor type? Yes, supports mV sensors.
• Is HART® protocol enabled? Yes, HART® over 4-20mA.
• What relay outputs are available? 3 independent relays.
• Does it work in cold climates? Operates down to -40°C.
• Can I use Modbus? Not direct; HART® to Modbus via gateway.

Shipping & Warranty

Shipping: FedEx, UPS, DHL – worldwide express (2-5 days).

Warranty: 12 months from invoice date, covers manufacturing defects.

Why Buy From Oiltech Controls?

• 15+ years in industrial automation spares
• Global shipment with tracking
• Tested surplus & refurbished options
• 12-month warranty on all products
• Technical verification prior to dispatch
• Expert support for obsolete systems

Contact:
info@oiltechcontrols.com
|
+86 158 8020 0923

Original Source: https://www.oiltechcontrols.com/

Copyright © 2026 Oiltech Controls Limited. All rights reserved.