Modicon Quantum 140XTS00209 I/O Cable SUB-D 50 Connector

140XTS00209 – CableFast System Cable (2.7 m)

Brand: Schneider Electric | Series: Modicon Quantum | Type: CableFast Power Cable

The 140XTS00209 is a terminated CableFast system cable for Quantum I/O modules. It measures 2.7 meters (8.9 ft) and provides standard power connection between the Quantum module and a SUB-D 50-pin connector. This black cable is designed for reliable signal and power transmission in control cabinets. It supports local, distributed, and remote I/O configurations.

Technical Specifications

• Cable length: 2.7 m (8.9 ft) – suitable for panel-to-device wiring.
• Power type: Standard (supports both signal and power).
• Termination: Pre-terminated connectors – ready to use.
• Connector 1: Quantum I/O module (proprietary).
• Connector 2: SUB-D 50-pin (female) – for external devices.
• Color: Black – standard industrial identification.
• Weight: 915 g (32.3 oz) – lightweight and flexible.

Oiltech Controls’s Review

• This CableFast cable is a direct replacement for original Quantum wiring. We have tested it with 140ACI, 140ACO, and 140DAI modules – it works flawlessly. The 2.7 m length gives enough slack for most cabinet layouts without excessive coiling.
• Pro tip: Always verify the pinout before connecting to third-party devices. The SUB-D 50 connector follows standard Quantum pin assignments. For harsh environments, we recommend using cable ties to secure the cable and avoid strain on the connectors.

Why Buy From Oiltech Controls?

• 15+ years of experience in industrial automation spare parts.
• Global shipping support – FedEx, UPS, or DHL express.
• Each unit tested (surplus or refurbished) before shipment.
• 12-month warranty against defects in material and workmanship.
• Technical verification performed prior to dispatch.
• Expert help for obsolete or legacy control systems.

Installation & Wiring Guidelines

• Plug the Quantum I/O connector into the module’s dedicated port.
• Connect the SUB-D 50 end to the field device or terminal block.
• Secure the cable using cable glands or ties to prevent tension.
• Do not bend the cable sharply – minimum bend radius is 50 mm.
• Route away from high-voltage or high-noise sources (motors, drives).

Debugging & Maintenance Tips

• If a module does not power up, check the cable continuity with a multimeter.
• Inspect pins on both connectors for bent or broken terminals.
• Use contact cleaner if oxidation is suspected (especially in humid areas).
• This cable is passive – no configuration or software setup required.
• Replace immediately if any cut or abrasion is visible.

Compatibility & Suitable Devices

• Processors: 140CPU11302, 140CPU43412A, 140CPU65160S.
• I/O modules: 140ACI03000, 140ACO13000, 140DAI75300, 140DDO84300.
• Power supplies: 140CPS11420, 140CPS12420, 140CPS21400.
• Communication: 140NOE77101, 140NOM25200.
• Works with all Quantum modules that have the standard I/O connector.

Environmental & Physical Data

• Operating temperature: -25 °C to 70 °C.
• Storage temperature: -40 °C to 85 °C.
• Flame retardant: UL 94 V-0 rated.
• Oil and grease resistant – suitable for industrial floors.
• RoHS compliant – lead-free construction.

Typical Applications

• Connecting analog input modules to field transmitters.
• Wiring digital output modules to actuator panels.
• Interfacing remote I/O racks with local controllers.
• Upgrading legacy Quantum systems with new cabling.
• Replacing worn or damaged original cables.

Diagnostic Capabilities

• No active electronics – diagnostics rely on module LED indicators.
• Check module status LEDs for communication errors.
• Use a cable tester to verify each pin is properly connected.
• Monitor power supply voltage at the SUB-D end to ensure proper delivery.
• Physical inspection for wear is the primary diagnostic method.

Professional FAQ (Experience-based)

• Q: Can I extend this cable beyond 2.7 meters?
  A: We do not recommend extending the 140XTS00209 beyond its rated length. Signal attenuation may occur. For longer runs, use a Quantum cable extension kit or a fieldbus solution.
• Q: Does this cable support both analog and digital signals?
  A: Yes. The 140XTS00209 is a standard power cable that carries both power and signal lines. It is fully compatible with analog (e.g., 140ACI) and digital (e.g., 140DAI) modules.
• Q: How do I know if this cable is the correct part for my module?
  A: Check your module’s connector type. If it has a proprietary Quantum I/O port and requires a SUB-D 50 termination, this is the correct cable. Always cross-reference with your module’s datasheet.
• Q: Can I use this cable with non-Schneider devices?
  A: Yes, as long as the field device has a SUB-D 50 female connector with matching pinout. However, we recommend verifying the pin assignments to avoid damage.
• Q: What is the most common failure mode for this cable?
  A: Mechanical stress at the connector ends. Frequent bending or pulling can break internal wires. Use strain relief and avoid tight bends to extend cable life.

Shipping & Warranty Information

• Dispatch: Within 24–28 hours after order confirmation.
• Carriers: FedEx, UPS, DHL – express worldwide.
• Warranty: 12 months covering material and workmanship defects.
• Returnability: No (non-returnable item).

Contact: info@oiltechcontrols.com | +86 158 8020 0923

Original Source: https://www.oiltechcontrols.com/
Copyright © 2026 Oiltech Controls Limited. All rights reserved.