MTL5024 Hazardous Area Controller – Smart On/Off Solution for Explosive Environments
Safe Control for Dangerous Zones
The MTL5024 safely operates equipment in explosive areas using simple switches or logic signals. Features phase reversal for flexible control of solenoids, alarms, and LED indicators.
Key Features
- 45mA output for hazardous area devices
- Works with switches or logic signals (1.4V-4.5V)
- Selectable phase reversal function
- Dual LED status indicators
- Earth leakage detection
Technical Specifications
| Model: | MTL5024 (Full: MTL5024-RG-7-0-0) |
| Output Voltage: | 12.85V-25V |
| Current Limit: | 45mA max |
| Input Signal: | Volt-free or 1.4V-4.5V logic |
| Response Time: | <5ms |
| Power Range: | 20-35V DC |
| Temp Range: | -20°C to +60°C |
Simple Connections
- 1-2: Hazardous area load
- 3: Earth detection
- 11-12: Control signal
- 13-14: Power supply
Safety Certified
Approved for Zone 0 IIC T4-T6 and Division 1 Group A hazardous locations. Meets strict explosion protection standards.
What’s Included
- 1 MTL5024 controller unit
- Quick start guide
- Mounting hardware
Common Questions
- Can I control multiple devices?
Yes – if total load doesn’t exceed 45mA. - What does yellow LED indicate?
Output active status. - How to reverse control logic?
Use the phase switch on the base. - Minimum wire size?
0.5mm² (24AWG) recommended. - Can it handle AC loads?
No – DC only.
Shipping & Warranty
Fast worldwide delivery via FedEx/UPS/DHL. Your MTL5024 includes 12-month performance guarantee.
Reviews
There are no reviews yet.