Core Interface & Bus Architecture
- Access Density: 24 × 10/100/1000Base-T RJ45 auto-sensing ports with MDI/MDI-X crossover detection.
- Uplink Capacity: 4 × 10G SFP+ optical slots with built-in 300m 10G multi-mode optical transceiver modules.
- Switching Capacity: Dual-rate switching engine supporting 336 Gbps up to 3.36 Tbps bandwidth.
- Packet Forwarding Rate: Non-blocking 126 Mpps wire-speed L2 packet forwarding rate across all ports.
Electrical & Environmental Limits
- Power Input: Universal AC operational range 100V AC ~ 240V AC, 50/60 Hz.
- Power Consumption: Ultra-low draw with 10W Minimum idle load and 24W Maximum under full traffic link.
- Dimensions & Weight: 1U rack-mountable chassis measuring 440 × 160 × 43.6 mm; total weight < 2.5 kg.
- Operating Environment: 0°C ~ 45°C operating temperature; 10% ~ 95% non-condensing operating relative humidity.
- Out-of-Band Management: 1 × Dedicated RJ45/RS-232 Console management port for serial configuration.
Oiltech Controls’ Insight
- Control Network Backbones: Connects remote PLC racks, SCADA servers, and industrial DCS controllers with zero throughput bottlenecks.
- High-Bandwidth Fiber Uplinks: Integrated 10G multi-mode SFP+ optics eliminate optical transceivers sourcing during site deployment.
- Suitable Equipment Topologies: Highly recommended for Honeywell Experion, Emerson DeltaV, Siemens S7-1500, and Yokogawa CENTUM VP network rings.
- EMI Protection: Ideal for plant environments with high electromagnetic noise requiring optical isolation.
Dispatch & Hardware Warranty Terms
- Fast Logistics Processing: Guaranteed dispatch within 24 to 28 hours upon order confirmation.
- Express Courier Partners: Priority international shipping via FedEx, UPS, and DHL door-to-door services.
- Comprehensive Warranty: Fully covered by our 12-Month Hardware Replacement Warranty against system component failure.
Why Choose Oiltech Controls?
- 1.5 Decades in Industrial Automation: Deep domain expertise in active and legacy control system spare parts.
- Worldwide Express Distribution: Established global supply chain offering rapid delivery to critical industrial facilities.
- Validated Surplus & Refurbished Hardware: Bench-tested pre-owned inventory providing economical lifecycle extension options.
- Comprehensive 1-Year Coverage: Complete 12-month advance replacement protection on every supplied component.
- Pre-Dispatch Engineering Audit: Rigorous link validation, backplane testing, and power stability verification before dispatch.
- Obsolete System Migration Support: Hard-to-find network hardware stocked specifically to prevent unplanned plant downtime.
Frequently Asked Questions (FAQ)
Q1: How does the built-in 300m 10G multi-mode module in the S5130S-28S-SI-MM handle long-distance links between control cabinets?
A: The S5130S-28S-SI-MM comes with integrated 10G SFP+ multi-mode optics engineered for OM3/OM4 LC optical links up to 300 meters. If your cabinet span exceeds 300 meters, an external single-mode SFP+ module or an inline converter must be utilized.
Q2: Can the S5130S-28S-SI-MM replace legacy 100/1000M switches in older DCS control networks?
A: Yes, the 24 RJ45 ports feature auto-negotiation down to 10M/100M. However, site engineers should verify whether legacy protocols rely on unmanaged broadcast domain behavior or require specific VLAN mapping beforehand.
Q3: What specific diagnostic checks are performed on the S5130S-28S-SI-MM prior to shipping?
A: Oiltech Controls subjects each unit to a 24-hour thermal burn-in test, 100% port traffic loopback testing, power supply load analysis, and optical power output verification on the 10G SFP+ uplinks.
Q4: How does this switch perform in high-ambient-temperature industrial enclosures without active cooling?
A: Operating up to 45°C with a low maximum draw of 24W, standard panel ventilation is usually sufficient. For IP66 enclosures situated near heat-generating machinery, external heat exchangers are recommended.
Q5: What is the procedure if a switch fails during the 12-month warranty period?
A: Email info@oiltechcontrols.com with diagnostic logs. Upon confirmation, our engineering team dispatches an advance replacement unit via express carrier (DHL/FedEx/UPS) to minimize site downtime.
Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.
Reviews
There are no reviews yet.