Product Summary
The Siemens 6ES7453-3AH00-0AE0 FM 453 offers fast motion control for S7-400. It drives servo and stepper motors with high precision. Encoders run up to 1 MHz. It fits strong motion machines in factories.
Main Features
- Three channels for motion tasks
- Servo and stepper drive support
- Safe I/O with fast update time
- Stable duty in warm cabinets
- Works well in upgrade projects
Electrical Details
- Supply DC: 24 V rated
- Range: 20.4 V to 28.8 V
- Backplane draw: 1.6 A max
- Encoder supply: 5 V or 24 V
- Typical loss: 8 W
Digital I/O
- Inputs: 6 per axis
- Delay low to high: 15 µs max
- Outputs: 4 per axis
- Short-circuit safe
- 0.5 A max at 40°C
Encoder Support
- Incremental and SSI absolute
- RS 422 signal format
- 1 MHz at 10 m cable
- 250 m shielded for SSI slow
- Strong noise immunity
Drive Modes
- Analog -10 to +10 V command
- Stepper pulse: 200 kHz now, higher coming
- Enable control up to 50 V
- Accurate pulse waveforms
- Low drift in long runs
Mechanical Data
- Width: 50 mm
- Height: 290 mm
- Depth: 210 mm
- Weight: 1620 g approx
- Front connector: 48-pin
Environmental
- Use: 0°C to 55°C
- Store: −40°C to 70°C
- Isolated I/O by optocouplers
- Industrial cabinet ready
- Low EMI footprint
Extra Selling Points
- High speed loop control
- Clear wiring plan saves time
- Good for CNC cut lines
- Better part quality with smooth motion
- Wide cable reach for large machines
Warranty & Shipping
- 12-month warranty period
- Ship by FedEx, UPS, DHL
- Shock-safe packing
FAQ
- How to tune the axis
Start slow, set ramp, then rise speed step by step. - Can it run mixed encoder types
Yes, but match for each channel. - What if pulses drop
Shorten cable or raise shield level. - Can it stop quick in faults
Yes, outputs drop fast on error. - How to check power noise
Use small ferrite near motor leads.
Selection Tips
- Pick for 3-axis motion with fast pulse
- Pick for plants with S7-400 CPU
- Pick when both servo and stepper exist
- Pick for long cable encoder lines
- Ask if unsure on load current
Contact
- Email: info@oiltechcontrols.com
- WhatsApp: +86 158 8020 0923
Copyright © 2025 Oiltech Controls Limited.
https://www.oiltechcontrols.com/ All rights reserved.
Partner PLCDCS HUB Limited
Powergear X Automation Limited
All rights reserved.
Reviews
There are no reviews yet.