Product Overview
The Delta Electronics VFD1A7MS53ANSAA is a high-performance VFD-MS300 series standard compact vector control drive. Engineering teams select this micro drive for its high efficiency and space-saving design. It supports both Open Loop and Closed Loop system architectures. The hardware delivers consistent torque under harsh load shifts. Contact info@oiltechcontrols.com for stock availability.
Technical Specifications
- Brand: Delta Electronics
- Model Number: VFD1A7MS53ANSAA
- Product Series: VFD-MS300
- Input Voltage: 575V AC 3-Phase
- Rated Output Current: 1.7A Heavy Duty (HD)
- Motor Power Capacity: 1HP (0.75kW)
- Output Frequency Range: 0 to 599Hz (Programmable up to 2000Hz)
- Control Modes: Volt/Hertz (V/f), Sensorless Vector, Closed Loop Vector
- Overload Capacity: Drive current adjusts up to 120% nominal capacity
- Digital Control Inputs: 11 digital inputs (4 dedicated and 7 programmable)
- Analog Control Inputs: 3 analog inputs for external command signals
- System Outputs: 4 digital, 1 analog, and 1 digital frequency output
- Network Protocol: Built-in RS-485 port with Modbus RTU and ASCII
- Enclosure Rating: IP20 protective housing
- Braking Chopper: Built-in dynamic braking transistor for fast deceleration
- Frequency Response: High-speed loop processing ensures precise speed tracking
- Resolution Accuracy: Fine frequency tuning steps for highly accurate velocity loops
- Linearity Performance: Flat output response curve across the full control spectrum
- Temperature Limits: Industrial grade operation from -20°C to 50°C without derating
- Noise Immunity: High electromagnetic compatibility shields control logic from factory interference
Industrial Applications
- High-speed machine tool spindles requiring up to 2000Hz operation
- Factory conveyor systems utilizing constant torque management
- Winder systems using closed loop vector tension control
- Food processing pumps requiring reliable IP20 motor automation
Installation and Mechanical Guide
- Mount the IP20 chassis vertically on flat backplates
- Keep clear air space above and below the drive heatsink
- Use shielded power cables to block high-frequency electromagnetic noise
- Connect the protective earth ground directly to the main cabinet ground bus
System Compatibility and Commissioning
- The drive interfaces smoothly with standard Modbus RTU automation networks
- Input terminals accept wide 575V industrial power distribution grids
- Configure the 11 digital inputs to match standard PLC logic layouts
- Calibrate the 3 analog inputs for standard 0-10V or 4-20mA sensor signals
Diagnostics and Fault Identification
- The drive display shows real-time fault codes for fast troubleshooting
- Internal sensors monitor overcurrent conditions up to 120% capacity limit
- The firmware tracks phase loss, overvoltage, and thermal overload states
- Engineers can read internal status registers remotely via RS-485 Modbus
Shipping, Packaging, and Warranty
- Box Contents: One Delta VFD1A7MS53ANSAA drive and quick start guide
- Factory Warranty: Includes full 12-month quality warranty from purchase date
- Global Shipping Partners: Fast delivery via FedEx, UPS, and DHL express networks
Technical Documentation Download
- Get the parameters list guide for easy software commissioning
- Download the Modbus register map for PLC network programming
- Message our engineering desk via WhatsApp (+86 158 8020 0923) for immediate technical manuals
Frequently Asked Questions (FAQ)
- Q: Can this drive run a standard 3-phase motor at 2000Hz?
A: Yes. You can program the VFD-MS300 firmware up to 2000Hz for high-speed spindles. - Q: Does this drive include a built-in braking resistor?
A: It includes a built-in dynamic braking transistor. You must wire an external resistor for full braking power. - Q: What is the heavy duty current rating for this model?
A: The continuous heavy-duty current output rating is 1.7A.
Copyright © 2026 Oiltech Controls Limited. All rights reserved. Original Source: https://www.oiltechcontrols.com/ All rights reserved.
Reviews
There are no reviews yet.