ADV161-P50 Module Fast Introduction
- Brand: Yokogawa
- Model: ADV161-P50
- Type: Digital I/O module
- Total inputs: 64 channels
- Signal level: 24 V DC
- Works with Yokogawa Centum VP
- Supports status and pushbutton logic
- High density DI collection
Channel And Signal Capabilities
- 64 digital input points
- Sink or source wiring
- Rated voltage: 24 V DC
- ON level: 20 to 26.4 V DC
- OFF level: 5 V DC or less
- Input current: 2.5 mA per channel
- Current tolerance: ±20 percent
- Max input voltage: 30 V DC
Timing And Detection Features
- Status response time: ≤8 ms
- Pushbutton min detect: 20 ms
- Max cycle rate: 25 Hz
- Edge count support built in
- Stable signal filtering
- Low false trigger rate
Protection And Isolation Data
- Signal to system: 2 kV AC for 1 minute
- Between commons: 500 V AC
- Common grouped every 16 points
- Good surge resistance
- Designed for plant noise zones
Power And Load Profile
- Max draw: 550 mA at 5 V DC
- Low per-channel load
- Good for full ON state
- Stable under heavy input use
Cable And Interface Choices
- Dedicated cable: AKB337
- MIL connector cable supported
- Fast plug cable design
- Reduces wiring time
- Good for pre-made harness
Suffix Code Tree
- ADV161
- 64-point digital input base
- -P
- Pushbutton edge detect enabled
- -5
- No status LED display
- No explosion protection
- -0
- Basic hardware version
Extra Technical Selling Points
- Ultra high point density
- Saves rack slots
- Ideal for large DI lists
- Built-in edge counter logic
- Fast cabinet integration
- Works with dry contacts
- Works with transistor outputs
- Trusted Yokogawa design
Typical Project Uses
- Motor status panels
- Valve limit switches
- Alarm input groups
- ESD signal monitoring
- Batch plant signals
Warranty And Shipping Plan
- Warranty: 12 months
- Each unit tested
- Export safe packing
- Ship by FedEx
- Ship by UPS
- Ship by DHL
FAQ With Field Experience
- When should I choose 64 point instead of 32 point
- Choose 64 when cabinet space is tight.
- Is this module good for fast pulse signals
- Yes, up to 25 Hz pushbutton cycles.
- Can I mix different sensor types
- Yes, if all are 24 V DC class.
- What wiring tip helps most in practice
- Group commons by 16 channels carefully.
- Should I keep spare DI capacity
- Yes, keep at least 10 percent free.
Contact And Quotes
- Email: info@oiltechcontrols.com
- WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Partner PLCDCS HUB Limited . All rights reserved.







Reviews
There are no reviews yet.