Allen-Bradley 1606-XLE120E: 120 W, 24 V DC, 5 A Supply
The 1606-XLE120E is an Allen-Bradley Bulletin 1606-XL essential switched-mode power supply. It delivers 24 V DC, 5 A, 120 W. Wide-range input covers 90-264 V AC and 110-300 V DC. Efficiency is 94.3 % typical. The DC OK relay contact gives a hard status signal to your controller. Screw terminals and DIN rail or wall mount keep wiring simple. Buyers of the 1606-XLE120E get a tested unit, 24-28 h dispatch, and a 12-month warranty from Oiltech Controls.
Hardware
- Mounting: DIN rail or wall mount
- Output: 24 V DC nominal, adjustable 24-28 V DC
- Output current: 5 A maximum (120 W)
- DC OK relay contact: present
- Connection: screw terminals
- Protection: overload and short circuit; dynamic 120 % power boost up to +45 °C
- Approvals: UL 60950-1, cUL, CE marked
Communication
- Ports: none. No bus interface on this model.
- Protocols: none. Status comes only from the DC OK relay contact.
- Use case: pair the contact with a PLC digital input for supply health.
Electrical Data
- Input: 100-240 V AC nominal (90-264 V AC operating); 110-300 V DC
- Output: 24 V DC nominal, trim 24-28 V DC
- Current: 5 A max. Power: 120 W
- Efficiency: 94.3 % typical
- Hold-up time: over 80 ms typical at 120 V AC
- Ripple and noise: 50 mV max
- Power losses: 7.3 W typical. Power factor: 0.91 typical
Environmental and Physical
- Operating temperature: -25 to +70 °C
- Storage temperature: -25 °C lower bound published
- Humidity: 5-95 % RH, non-condensing
- Protection rating: IP20
- Size (H×W×D): 124 × 32 × 102 mm
- Weight: 0.44 kg
Lifecycle Status
- Status: Active on the official Rockwell product page
- Last verified: 2026-10
- Stock is tested before dispatch. Ask for label photos.
Reviews
There are no reviews yet.