1606-XLP90E-2 – Allen-Bradley 1606-XLP Compact Power Supply, 24 V DC, 90 W
The 1606-XLP90E-2 is a compact two-phase supply for 380 to 480 V AC lines. It delivers 24 V DC at 90 W and 3.75 A. Spring clamp terminals speed up wiring. NEC Class 2 rating limits output energy for safer field circuits. There is no power boost and no communication port. The housing is small and light at 0.36 kg. This unit fits dense panels that tap two phases of a 400 V system.
Identity Block
- Model: 1606-XLP90E-2
- Brand: Allen-Bradley
- Series: Bulletin 1606-XL
- Family: 1606-XLP compact housing
- Input type: two-phase 380 to 480 V AC
Input and Output Data
- Input range: 323 to 552 V AC operational
- Output trim: 24 to 28 V DC
- Current: 3.75 A at 24 V
- Rated power: 90 W
- Efficiency: 89.5% typical
- Hold-up time: over 93 ms typical at 480 V AC
Terminals and Protections
- Spring clamp terminals for fast field wiring
- NEC Class 2 output classification
- No power boost function
- No communication port or protocol
- DIN rail and wall mounting
- Body size: 75 × 73 × 103 mm
- Weight: 0.36 kg
Environment and Ratings
- Operating temperature: -10 °C lower bound published
- Storage temperature: -40 °C lower bound published
- Relative humidity: below 95%, non-condensing
- Protection rating: IP20
- Approvals: UL 60950-1, cUL, CE marked
Oiltech Controls’s Insight
- Two-phase input suits machines that only run 400 V AC loads.
- NEC Class 2 output simplifies field circuit protection design.
- Spring clamps cut wiring time on high-count panels.
- No boost means you must size loads within 3.75 A steady.
- Hold-up above 93 ms helps on soft 480 V AC feeds.
Machine Types It Serves
- European-style machines on 400 V AC two-phase feeds
- Sensor and relay circuits needing NEC Class 2 output
- Compact panels with shallow DIN rail depth
- Retrofits that replace older 90 W supplies
- Handling cells with light DC loads
Why Buy From Oiltech Controls?
- 15+ years in automation spare parts supply
- Global shipping support
- Tested surplus and refurbished units
- 12-month warranty on all orders
- Technical verification before shipment
- Support for obsolete control systems
Shipping and Contact
- Ships within 24 to 28 hours
- Couriers: FedEx, UPS, DHL
- Warranty: 12 months
- Email: info@oiltechcontrols.com
- WhatsApp: +86 158 8020 0923
FAQ
Q: Can I run this unit on single-phase 230 V AC?
A: No. It needs two phases of 380 to 480 V AC. For 230 V AC duty, use a single-phase 1606-XL model with matching input class.
Q: What does NEC Class 2 mean for my panel?
A: It limits output energy. This can simplify protection of field wiring under Class 2 rules. Check your local code before you rely on it.
Q: Why is there no power boost?
A: The XLP compact design omits boost. Size inrush loads and valves within 3.75 A steady current. Add margin for startup peaks.
Q: How do I pick the right replacement unit?
A: Match input class, output watts, current, and terminal type. Two-phase 400 V input is the key filter here. Send us the old nameplate photo for a cross-check.
Q: Are spring clamp terminals reliable in high-vibration cells?
A: Yes, when wires are stripped to spec and seated fully. Tug-test each wire after landing. Re-check clamps during routine service.
Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.
All rights reserved.
Reviews
There are no reviews yet.