1734-FPD Allen-Bradley POINT I/O Field Power Distributor
The 1734-FPD is an Allen-Bradley POINT I/O field power distributor. It feeds field power to POINT I/O modules. This module accepts 12/24V DC or 120/240V AC input. In addition, it supplies up to 10A to the field power bus. It also provides 250V continuous isolation. Because there are no active electronics, power consumption and thermal dissipation are zero. You can mount it horizontally or vertically. Therefore, it suits compact distributed control panels.
Technical Specifications
| Brand | Allen-Bradley |
| Model | 1734-FPD |
| Series | POINT I/O |
| Module Type | Field Power Distributor |
| Manufacturer | Rockwell Automation |
| Catalog Number | 1734-FPD |
| UPC | 10612598206886 |
| Power Supply Input | 12/24V DC or 120/240V AC |
| Working Voltage Range | 10–28.8V DC or 120–240V AC |
| Field Power Supply Current | 10A |
| Field Power Bus Supply Current | 10A |
| Isolation Voltage | 250V continuous |
| Isolation Test | 2600V DC for 60s |
| Power Consumption | None |
| Thermal Dissipation | None |
| Operating Temperature | -20 to 55°C |
| Dimensions | 76.2 x 25.4 x 133.4 mm |
| Weight | 0.12 kg |
| Terminal Base Screw Torque | 0.6 Nm (7 lb-in) |
| Wire Size | 0.25–2.5 mm² (22–14 AWG) copper, 75°C rated |
| Terminal Block | Removable terminal block (RTB) with terminal handle |
| Enclosure Type | Open style |
| Mounting | Horizontal or vertical |
Installation Guide
- First, mount the 1734-FPD on a DIN rail in a clean panel area.
- Also keep the module clear of high-voltage wiring and heat sources.
- Use 22–14 AWG copper wire rated for 75°C.
- Then tighten terminal screws to 0.6 Nm.
- Confirm input voltage is within 10–28.8V DC or 120–240V AC.
- Moreover, check field bus current stays below 10A.
- Finally, verify isolation before powering the bus.
Commissioning and Maintenance
- At startup, inspect terminals and RTB seating.
- Then check voltage at the field power bus under load.
- Keep the open-style enclosure free of dust and metal chips.
- After long service intervals, re-torque terminal screws.
- Replace damaged RTB parts before re-energizing the module.
- Because the module has no active electronics, field checks focus on wiring and isolation.
Compatibility and Diagnostics
The 1734-FPD works with POINT I/O terminal bases and adapters. It supports ControlNet, DeviceNet, EtherNet/IP and other open networks through 1734 adapters. Use it in mixed AC/DC field power layouts. Diagnostics rely on field voltage checks, isolation tests and current measurement at the bus. However, there is no internal power conversion. Therefore, module faults usually trace to wiring, terminal torque or supply quality.
Typical Applications
- Distributed I/O panels in factory automation
- Field power distribution in POINT I/O racks
- Packaging, material handling and assembly cells
- Retrofit and upgrade projects for legacy control systems
- Compact panels with mixed AC and DC field devices
Why Buy From Oiltech Controls?
- Over 15 years of industrial automation spare parts experience.
- Worldwide shipment support through FedEx, UPS and DHL.
- Tested industrial surplus and refurbished options available.
- 12-month warranty on qualifying products.
- Technical verification before shipment.
- Support for obsolete control systems.
Packing List and Warranty
- 1 x 1734-FPD Field Power Distributor
- Removable terminal block and terminal handle as supplied
- Protective packaging
- 12-month warranty terms included
- Shipping by FedEx, UPS or DHL
FAQ
Q: What is the input voltage?
A: 12/24V DC or 120/240V AC.
Q: What is the field power current?
A: 10A maximum.
Q: What is the isolation rating?
A: 250V continuous, tested at 2600V DC for 60s.
Q: What is the operating temperature?
A: -20 to 55°C.
Q: What wire size does it use?
A: 0.25–2.5 mm² (22–14 AWG) copper wire rated for 75°C.
Q: Does the module consume power?
A: No. It has no power consumption and no thermal dissipation.
Q: How does it connect to the network?
A: Through 1734 adapters for ControlNet, DeviceNet, EtherNet/IP and other open networks.
Inquiries: info@oiltechcontrols.com | WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
All rights reserved.
Reviews
There are no reviews yet.