1763-L16DWD MicroLogix 1100 Programmable Controller 12/24VDC

1763-L16DWD MicroLogix 1100 Programmable Controller

The 1763-L16DWD is an Allen-Bradley MicroLogix 1100 controller. It suits DC control panels and small automation cells. It combines digital I/O, analog inputs, relay outputs, Ethernet and serial ports in one compact unit.

This controller is a practical choice for machine builders and maintenance teams. It supports fast input capture, simple analog sensing and relay switching. It also offers an LCD and keypad for local monitoring.

Technical Specifications

Measurement, Resolution and Environmental Ratings

• Analog range: 0 to 10 VDC; resolution 10-bit.
• Input impedance: 3.1 kΩ for digital channels; 210 kΩ for analog channels.
• Temperature range: -20 to 65 °C operating.
• Noise and shock: 30 G pulse shock; 1.5 G vibration limit.
• Overvoltage: analog input protected to 10.5 VDC.
• Frequency response: use high-speed inputs for fast pulse capture; relay output timing is 10 ms maximum.

Installation Guide

• Mount horizontally on DIN rail or a flat panel.
• Use 12 to 20 AWG solid wire or 14 to 20 AWG stranded wire.
• Use Belden #8761 cable for analog signals with drain wire and foil shield.
• Connect the shield to the grounding system.
• Keep power and signal wiring separated where possible.
• Allow space for up to four 1762 expansion modules.

Commissioning and Maintenance

The built-in LCD and keypad let users view and change controller data locally. This helps during commissioning and quick fault checks. The backup battery protects volatile RAM. Replace it on a planned maintenance schedule. Relay outputs are serviceable for high-cycle loads. Always verify wiring before power-up.

Compatibility Notes

The 1763-L16DWD works with 1762 MicroLogix expansion modules. It connects to HMIs, SCADA systems, programming workstations and third-party devices. Serial ports support DF1, DH485, Modbus and ASCII. The Ethernet port supports Ethernet I/P. Analog inputs accept 2-wire, 3-wire and 4-wire transmitters.

Certification Information

Certified for Class 1, Division 2, Hazardous Locations, Groups A, B, C and D. This rating supports use in selected industrial environments where flammable gases may be present under abnormal conditions.

Packing List and Warranty

• 1 x 1763-L16DWD controller
• 1 x terminal block set as supplied
• 1 x documentation set as available
• 12-month warranty included

Shipping options: FedEx, UPS and DHL. Orders ship after technical verification.

Typical Applications

• Small machine control panels
• Pump and valve logic
• Conveyor interlocking
• Analog sensor monitoring
• Remote I/O and SCADA links
• Legacy MicroLogix 1100 replacement

Diagnostic Capability

The LCD and keypad support local status checks. The RS-232/RS-485 and Ethernet ports support programming and HMI diagnostics. Relay output timing and input status help isolate field faults. The controller suits fast troubleshooting in small control systems.

Why Buy From Oiltech Controls?

• 15+ years in industrial automation spare parts.
• Global shipment support through FedEx, UPS and DHL.
• Tested industrial surplus and refurbished options.
• 12-month warranty on eligible products.
• Technical verification before every shipment.
• Support for obsolete control systems.

Inquiries: info@oiltechcontrols.com or +86 158 8020 0923.

FAQ

Q: What power does the 1763-L16DWD need?
A: It uses 12 to 24 VDC input power.

Q: How many analog inputs does it have?
A: It has 2 analog inputs with 0 to 10 VDC range.

Q: Does it include Ethernet?
A: Yes. It has one Ethernet port and one RS-232/RS-485 combo port.

Q: Can it use expansion modules?
A: Yes. It supports up to 4 x 1762 MicroLogix modules.

Q: What is the warranty?
A: Eligible units include a 12-month warranty.

Q: How fast is shipping?
A: We ship by FedEx, UPS and DHL after technical verification.

Copyright © 2026 Oiltech Controls Limited. All rights reserved.

Original Source: https://www.oiltechcontrols.com/

All rights reserved.