Bently Nevada 330904-00-10-50-12-05: High-Performance NSv Proximity Probe
The Bently Nevada 3300 NSv proximity probe provides reliable vibration monitoring. This new probe comes in original factory packaging. It offers excellent chemical resistance for industrial applications. You can use it to replace older 3300 RAM probes. For complete technical details, download the datasheet below.
Download 3300 XL NSv Proximity Transducer System Datasheet
Product Overview
Model Configuration
- Base model 330904 defines 3300 NSv probe with M8x1 thread
- Suffix -00- indicates 0 mm unthreaded length
- Suffix -10- specifies 100 mm overall case length
- Suffix -50- means 5.0 meter total cable length
- Suffix -12- defines Miniature Coaxial ClickLoc connector
- Suffix -05- confirms multiple agency approvals
Technical Specifications
Key Parameters
- Brand: Bently Nevada
- Model: 3300 NSv (330904-00-10-50-12-05)
- Linear Range: 1.5 mm (60 mils) from 0.25 to 1.75 mm
- Recommended Gap: 1.0 mm (40 mils) for best performance
- Sensitivity: 7.87 V/mm (200 mV/mil) with tight tolerance
- Linearity: Better than ±0.06 mm across full range
- Frequency Response: 0 to 10 kHz for most applications
- DC Resistance: 5.3 ± 0.7 ohms for 5.0 meter cable
- Temperature Range: -52°C to +177°C for extreme conditions
- Cable Type: 75 Ω coaxial with FEP insulation
- Connector: Miniature coaxial ClickLoc type
Installation Guide
Mechanical Details
- Case Thread: M8x1 with 12 mm maximum engagement
- Installation Torque: Finger tight plus 5.1 N•m (45 in•lb)
- Maximum Torque: Never exceed 7.3 N•m (65 in•lb)
- Cable Bend Radius: Minimum 25.4 mm (1.0 inch)
- Target Size: Minimum 13 mm (0.5 inch) diameter
- Probe Tip Material: Chemical-resistant PPS plastic
- Case Material: Durable AISI 304 stainless steel
Packaging & Shipping
Order Contents
- One new Bently Nevada 3300 NSv proximity probe
- All items are original and factory sealed
- Global shipping via FedEx, UPS, and DHL
- Check your order for specific shipping details
Frequently Asked Questions
Product Compatibility
- What is different about the 3300 NSv probe?
- The 3300 NSv works with existing 3300 RAM systems. It provides better chemical resistance than older models.
System Configuration
- What is the maximum cable length?
- You can use field wiring up to 305 meters. Check the manual for signal requirements.
Installation Setup
- What gap setting should I use?
- Set the gap to 1.0 mm (40 mils) from the target. This gives the best measurement results.
Environmental Protection
- Can this probe handle pressure?
- The probe uses a Viton O-ring for pressure sealing. Contact us for specific pressure testing needs.
Product Dimensions
- What is the total cable length?
- Model 330904-00-10-50-12-05 has 5.0 meter (16.4 feet) total length.
© 2025 World of PLC Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Technical Support Contact: info@oiltechcontrols.com or +86 158 8020 0923
Partner: PLCDCS HUB Limited https://plcdcshub.com/ | PLC Pioneer Limited https://plc-pioneer.com/
Reviews
There are no reviews yet.