Bently Nevada 146054-08-10-00-05 3300 Ceramic Proximity Probe

Bently Nevada 146054-08-10-00-05 Overview

• Part Number: 146054-08-10-00-05
• Product Line: 3300 Ceramic Capped Proximity Probes
• Manufacturer: Bently Nevada
• Condition: New, unused, factory packing
• Warranty: 12-month factory warranty

Why This Probe Stands Out

• Short cable design improves signal clarity.
• Ceramic tip handles heat and abrasion.
• Certified for hazardous locations.
• Stable output for precise shaft position.
• Built for continuous industrial duty.

Ordering Code Logic

• 146054-AA-BB-CC-DD
  • 146054: 3300 probe, 3/8-24 UNF, no armor
  • AA: -08 case length, 0.8 inch
  • BB: -10 total cable length, 1.0 meter
  • CC: 00 without connector
  • DD: -05 CSA, ATEX, IECEx approvals

Electrical Characteristics

• System Type: 3300 5 mm proximity system
• Supply Voltage: -24 Vdc nominal
• Linear Span: 1.52 mm usable range
• Gap Range: 0.25 to 1.78 mm
• Output Signal: Approx. -4 to -16 Vdc
• Scale Factor: 7.87 V/mm
• Accuracy: ±6.5% over linear range
• DC Resistance: 7.59 ±0.50 ohms

Mechanical Construction

• Probe Tip: Alumina ceramic (Al₂O₃)
• Probe Body: AISI 304 stainless steel
• Thread Size: 3/8-24 UNF
• Max Thread Engagement: 0.563 inch
• Pressure Seal: 34 bar nitrogen

Cable & Environmental Limits

• Cable Type: 75 Ω coaxial, FEP insulation
• Cable Length: 1.0 meter
• Operating Temperature: -51°C to +177°C
• Storage Temperature: -51°C to +177°C
• Target Material: AISI 4140 steel

Hazardous Area Ratings

• Gas Zones: EPL Ga and Gc
• Dust Zones: EPL Dc
• Temperature Classes: T1 to T5
• Designed for explosive environments.

Shipping & Delivery

• Fast shipment via FedEx, UPS, or DHL.
• Certified export-grade packaging.
• Global delivery support.

Professional FAQ

• When should I choose a 1 meter probe?
• Use short cables to reduce signal loss.
• Is this probe safe for hazardous zones?
• Yes. It carries CSA, ATEX, and IECEx approvals.
• Can it handle high vibration levels?
• Yes. It suits turbine and compressor shafts.
• Does it work with non-steel targets?
• Calibration applies only to AISI 4140 steel.
• What should buyers check before ordering?
• Confirm cable length and area certification.

Contact Information Inquiries:
info@oiltechcontrols.com |
+86 158 8020 0923

Copyright © 2025 Oiltech Controls Limited. All rights reserved.
Original Source:
https://www.oiltechcontrols.com/
Partner
PLCDCS HUB Limited. All rights reserved.