Bently Nevada 146054-08-10-01-05 Product Introduction
- Part Number: 146054-08-10-01-05
- Series: 3300 Ceramic Capped Proximity Probes
- Brand: Bently Nevada
- Status: New and original factory packing
- Warranty: 12-month factory warranty
Key Selling Points
- ClickLoc connector ensures secure signal contact.
- Ceramic probe tip resists heat and wear.
- Stable output for precise shaft monitoring.
- Approved for hazardous industrial areas.
- Designed for long service life.
Ordering Code Structure
- 146054-AA-BB-CC-DD
- 146054: 3300 probe, 3/8-24 UNF thread, no armor
- AA: -08 overall case length, 0.8 inch
- BB: -10 total length, 1.0 meter
- CC: 01 ClickLoc miniature coaxial connector
- DD: -05 CSA, ATEX, IECEx approvals
Electrical Performance
- System Compatibility: 3300 5 mm proximity system
- Supply Voltage: -24 Vdc nominal
- Linear Measurement Span: 1.52 mm
- Effective Gap Range: 0.25 to 1.78 mm
- Output Voltage: Approx. -4 to -16 Vdc
- Scale Factor: 7.87 V/mm
- Accuracy: ±6.5% including interchangeability
- DC Resistance: 7.59 ±0.50 ohms
Mechanical & Material Design
- Probe Tip Material: Alumina ceramic (Al₂O₃)
- Probe Case: AISI 304 stainless steel
- Thread Type: 3/8-24 UNF
- Max Thread Engagement: 0.563 inch
- Pressure Seal Rating: 34 bar nitrogen
Cable & Environmental Limits
- Cable: 75 Ω coaxial, FEP insulated
- Cable Length: 1.0 meter
- Operating Temperature: -51°C to +177°C
- Storage Temperature: -51°C to +177°C
- Recommended Target: AISI 4140 steel
Hazardous Area Ratings
- Gas Zones: EPL Ga and Gc
- Dust Zones: EPL Dc
- Temperature Classes: T1 to T5
- Certified for explosive environments.
Shipping & Logistics
- Worldwide shipping via FedEx, UPS, and DHL.
- Industrial-grade protective packaging.
- Fast order processing.
Professional FAQ
- What is the benefit of the ClickLoc connector?
- It prevents loose connections during vibration.
- Is this probe suitable for high-temperature zones?
- Yes. It handles up to +177°C continuously.
- Can I mix this probe with other series?
- No. Use only with 3300 system components.
- How do I choose between connector types?
- Choose ClickLoc for frequent maintenance needs.
- What should installers watch during setup?
- Keep the probe gap inside the linear range.
Contact Information Inquiries:
info@oiltechcontrols.com |
+86 158 8020 0923
Copyright © 2025 Oiltech Controls Limited. All rights reserved.
Original Source:
https://www.oiltechcontrols.com/
Partner
PLCDCS HUB Limited. All rights reserved.
Reviews
There are no reviews yet.