Bently Nevada 3300 Ceramic Capped Proximity Probe
New & original 146054-08-50-01-00. Perfect for vibration monitoring. Ships in factory packing with 12-month warranty.
Product Highlights
- Durable Ceramic Tip resists wear and corrosion.
- Accurate Measurement for machine safety.
- Easy ClickLoc Connector for quick setup.
- Wide Temperature Range from -51°C to +177°C.
- High Pressure Rated up to 500 psi.
Ordering & Part Number Guide
Part Number: 146054-AA-BB-CC-DD
- 146054: 3300 Ceramic Probe, 3/8-24 thread
- -08 (AA): Case Length = 0.8 inch
- -50 (BB): Cable Length = 5.0 meters
- -01 (CC): Mini Coaxial ClickLoc Connector
- -00 (DD): Agency Approval Not Required
Technical Specifications
- Brand: Bently Nevada
- Model: 3300 Series Ceramic Probe
- Thread Size: 3/8-24 UNF
- Cable Length: 5.0 meters (16.4 feet)
- Connector: Miniature Coaxial ClickLoc
- Probe Tip: Alumina Ceramic (Al2O3)
- Case Material: AISI 304 Stainless Steel
- Cable Type: 75 Ω Coaxial, FEP insulated
- Linear Range: 0.25 to 1.78 mm (10 to 70 mils)
- Scale Factor: 7.87 V/mm ±6.5%
- DC Resistance: 8.73 Ω ±0.70 Ω (5m length)
- Operating Temp: -51°C to +177°C (-60°F to +351°F)
- Pressure Rating: 34 Bar (500 psi) nitrogen
System Compatibility Note
This 5 meter probe works with the 5 meter Proximitor only. Specs are for a full 3300 5mm system with AISI 4140 steel target at +18°C to +27°C.
Shipping & Support
- We ship fast worldwide via FedEx, UPS, and DHL.
- Your order comes with a full 12-month factory warranty.
Frequently Asked Questions
Product & Application
What machines use this probe?
This probe monitors vibration in turbines, compressors, pumps, and fans. It helps prevent machine failure.
Why is the tip made of ceramic?
Ceramic is very hard. It does not wear out quickly. It also resists electrical arcing better than metal tips.
Installation & Experience
How do I install this probe correctly?
First, clean the mounting hole. Use the correct torque on the thread. Always check the gap between the probe tip and the machine shaft.
My reading is unstable. What should I check?
Check the cable for damage. Ensure the connector is clean and tight. Look for loose mounting of the probe.
Purchasing Guide
How do I choose the right probe length?
Match the probe cable length to your Proximitor cable length. A 5m probe must pair with a 5m Proximitor system.
Contact for More Info: Email: info@oiltechcontrols.com | Phone/WhatsApp: +86 158 8020 0923
Copyright © 2025 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Partner: PLCDCS HUB Limited
Reviews
There are no reviews yet.