Bently Nevada 3300 Ceramic Capped Proximity Probe – 146054-08-50-02-00
- Part Number: 146054-08-50-02-00
- Model Family: 3300 Ceramic Capped Proximity Probes
- Manufacturer: Bently Nevada
- Product Status: New and original, factory packing
- Warranty: 12 months factory warranty
- Designed for demanding layouts
- 5.0 meter probe for remote mounting.
- Stable signal over long cable runs.
- Ceramic tip protects against heat damage.
- Ideal for large machines and turbines.
- Ordering Code Logic
- 146054
- 3300 ceramic capped probe body
- 3/8-24 UNF threaded case
- Non-armored design
- -08
- Overall case length: 0.8 inch
- -50
- Total probe length: 5.0 meters
- For use with 5 m Proximitor Sensor
- -02
- Miniature ClickLoc coaxial connector
- Standard probe cable
- -00
- No agency approval required
- 146054
- Mechanical Structure
- Thread size: 3/8-24 UNF
- Maximum thread engagement: 0.563 inch
- Tip material: Alumina ceramic (Al₂O₃)
- Probe housing: AISI 304 stainless steel
- Pressure seal rating: 34 bar (500 psi)
- Electrical Parameters
- Nominal DC resistance: 8.73 Ω ±0.70 Ω
- Cable impedance: 75 Ω coaxial
- Cable insulation: FEP material
- Optimized for -24 Vdc systems
- Measurement Characteristics
- Effective linear range: 1.52 mm
- Working gap: 0.25 to 1.78 mm
- Typical output signal: -4 to -16 Vdc
- Scale factor: 7.87 V/mm
- Repeatability verified on AISI 4140 steel
- Environmental Resistance
- Operating temperature: -51°C to +177°C
- Storage temperature: -51°C to +177°C
- Resistant to oil splash and vibration
- Suitable for hazardous area installations
- Typical Industrial Uses
- Shaft displacement monitoring
- Radial vibration measurement
- Steam and gas turbines
- Large compressors and pumps
- Delivery and Packaging
- Shipping via FedEx, UPS, or DHL
- Shock-resistant export packaging
- Worldwide logistics support
Expert FAQ
- Why is a 5.0 meter probe required?
- It suits large machines with distant mounting points.
- Can this probe work with shorter Proximitor sensors?
- No. It is designed for 5 m Proximitor sensors only.
- Does longer cable reduce accuracy?
- No. The system compensates for cable length.
- Is this probe safe in hot turbine areas?
- Yes. The ceramic tip handles high heat well.
- How do I choose between 2 m and 5 m probes?
- Choose based on cabinet distance and routing needs.
Contact Information Inquiries:
info@oiltechcontrols.com |
+86 158 8020 0923
Copyright © 2025 Oiltech Controls Limited. All rights reserved.
Original Source:
https://www.oiltechcontrols.com/
Partner
PLCDCS HUB Limited. All rights reserved.
Reviews
There are no reviews yet.