Bently Nevada 330173-00-18-10-02-05 3300 5mm Probe M8 Sensor

Long Body Metric Probe Introduction

• Bently Nevada 330173-00-18-10-02-05 is a long reach vibration probe.
• It belongs to the 3300 5mm Proximity Probes family.
• The 180 mm body supports deep mounting points.
• The M8 thread fits metric machine frames.
• It provides steady shaft displacement signals.
• Built for accurate monitoring in complex assemblies.

Model Code Structure Tree

• 330173 Identification Path
  • 00
    • Zero unthreaded length
  • 18
    • 180 mm extended probe case
  • 10
    • 1.0 meter cable assembly
  • 02
    • Mini ClickLoc coax connector
  • 05
    • Multiple certification approvals

Core Technical Characteristics

• Brand: Bently Nevada
• Model: 330173-00-18-10-02-05
• Sensing principle: Eddy current displacement
• Calibration gap: 1.27 mm reference
• Supply range: -17.5 to -26 Vdc
• Rated supply: -24 Vdc typical
• Max operating current: 12 mA
• Output impedance: 50 Ω
• Probe resistance: 7.59 ± 0.50 Ω
• Signal drift: <2 mV per volt change
• Response supports high speed rotation
• Magnetic immunity: up to 300 Gauss
• Operating temperature: -35°C to +177°C
• Thread type: M8 x 1 metric
• Maximum thread engagement: 12 mm
• Cable impedance: 75 Ω triaxial FEP
• Minimum bend radius: 25.4 mm
• Case material: AISI 304 stainless steel
• Tip material: PPS engineering polymer
• Tensile strength: 222 N retention
• Weight: 0.323 kg

Installation and Fit Strategy

• Use correct M8 threaded mounting hole.
• Limit engagement to 12 mm depth.
• Apply 5.1 N·m recommended torque.
• Never exceed 7.3 N·m torque.
• Protect cable during routing.

Industrial Performance Advantages

• Supports deep mounting sensor points.
• Maintains signal stability in heat.
• Improves early fault detection speed.
• Enhances machine safety and uptime.
• Handles vibration and shock loads.

Delivery Scope and Warranty

• 1 × original proximity probe
• Connector protection accessory
• Sealed industrial packaging
• 12 month warranty included
• Shipment by FedEx, UPS, or DHL

Advanced FAQ and Purchase Advice

• When should I use a long body probe
• Use it for recessed or shielded mounting points.
• Does probe length affect signal quality
• No. Proper calibration keeps accuracy stable.
• How do I store spare probes safely
• Keep them dry and capped in packaging.
• Can this probe run in high vibration zones
• Yes. It is built for harsh machinery.
• What must I check before purchase
• Confirm body length and certification needs.

Contact and Technical Support

• Email: info@oiltechcontrols.com
• WhatsApp: +86 158 8020 0923

• Copyright © 2026 Oiltech Controls Limited. All rights reserved.
• Original Source: https://www.oiltechcontrols.com/
• Partner PLCDCS HUB Limited https://plcdcshub.com/. All rights reserved.
• Powergear X Automation Limited https://www.powergearx.com/