DL100-11AA2102 SICK Dx100 Standard Laser Distance Sensor PROFIBUS

SICK DL100-11AA2102 Dx100 Standard Laser Distance Sensor

The DL100-11AA2102 belongs to the SICK Dx100 Standard family. It uses phase shift optical time-of-flight measurement. This model reaches up to 60 m on Diamond Grade reflective tape. It connects through PROFIBUS DP at up to 12 Mbit/s. The 1 ms internal cycle supports fast moving axes. The IP65 aluminum housing resists harsh industrial environments. This sensor suits automated storage and retrieval systems, cranes, and high-bay warehouses.

Technical Data

• Brand: SICK
• Model: DL100-11AA2102
• Series: Dx100 / Dx100 DL100 Standard
• Part Number: 1059959
• Range: 0.15 m to 60 m on Diamond Grade tape
• Principle: Phase shift optical time-of-flight
• Light Source: Red laser diode, 658 nm, Class 2
• Cycle: ≥ 1 ms internal measurement
• Repeatability: 0.5 mm to 1 mm, typical 0.5 mm at 1 σ
• Accuracy: Typical ± 2 mm to ± 3 mm
• Tracking Velocity: 15 m/s maximum
• Acceleration: 15 m/s² maximum
• Interface: PROFIBUS DP, EN 50170, up to 12 Mbit/s
• Digital Outputs: 2x push-pull, PNP/NPN, configurable B/Q, ≤ 100 mA
• Input: Multifunctional input MF
• Supply: DC 18 V to 30 V, reverse-polarity protected
• Power: Typical 8 W to 10 W
• Power Connector: M12 4-pin male
• PROFIBUS Connector: 2x M12 5-pin female, B-coded, SPEEDCON
• Operating Temperature: -20 °C to +55 °C
• Storage Temperature: -40 °C to +75 °C
• Protection: IP65 per EN 60529
• Dimensions: 69.4 mm x 82.5 mm x 100.2 mm
• Housing: Aluminum die-cast, PMMA optical window
• Weight: Approx. 800 g

Series Insight and Oiltech Controls Review

• The Dx100 Standard line targets mid-range positioning up to 60 m.
• PROFIBUS DP keeps integration simple in existing fieldbus networks.
• The 1 ms internal rate suits fast storage and retrieval axes.
• The optical 3-axis bracket helps engineers align the beam quickly.
• The LC display allows parameter checks without a PC.
• Condition monitoring tracks signal loss, laser aging, and temperature.
• Oiltech Controls verifies each unit before shipment.

Compatible Equipment

• Automated storage and retrieval systems (ASRS)
• High-bay warehouse stacker cranes
• Overhead cranes and trolley positioning
• Pallet conveyors and transfer cars
• Elevator and lift positioning systems
• PROFIBUS DP controlled material handling lines

Why Buy From Oiltech Controls?

• More than 15 years in industrial automation spare parts.
• Shipping support to customers worldwide.
• Tested surplus and refurbished options available.
• 12-month warranty on every order.
• Technical check before dispatch.
• Help for discontinued and obsolete control systems.

Shipping and Warranty

• Dispatch within 24 to 28 hours.
• Shipping by FedEx, UPS, and DHL.
• Tracking number shared after shipment.
• 12-month warranty covers product defects.
• Contact info@oiltechcontrols.com for order help.
• Call or message +86 158 8020 0923 on WhatsApp.

Professional FAQ

Q: Can the DL100-11AA2102 replace a discontinued 60 m PROFIBUS sensor?

A: Yes, in many cases. Check voltage, connector type, and PROFIBUS address range first. Our team can compare your old model before you order.

Q: What should I check before buying a used or refurbished unit?

A: Ask for test data, firmware version, and connector condition. Oiltech Controls performs technical verification before shipment.

Q: How do I align the sensor for best accuracy?

A: Use the optical 3-axis alignment bracket. Aim at Diamond Grade tape. Keep the beam path clear. Confirm signal level on the LC display.

Q: Does the 60 m range work on all targets?

A: No. The 60 m rating applies to Diamond Grade reflective tape. Natural surfaces give shorter range. Plan your target material before installation.

Q: What causes weak signal or unstable readings?

A: Common causes include dirty optics, misalignment, fog, dust, and aging reflective tape. Clean the PMMA window and recheck alignment first.

Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.