DL100-11AA2103 | SICK Dx100 DL100 Standard | RS-422 Distance Sensor
SICK DL100-11AA2103 is a phase-shift optical time-of-flight sensor. It belongs to the Dx100 DL100 Standard family. This model measures up to 60 m on Diamond Grade reflective tape. It uses an RS-422 serial interface for point-to-point communication. Power draw is only 8 W to 10 W. The unit includes continuous condition monitoring. It tracks signal level attenuation, laser diode aging, and temperature. The DL100-11AA2103 fits ASRS and high-speed positioning tasks. It offers 15 m/s tracking velocity and 15 m/s² acceleration. An integrated LC display speeds up setup. The housing is aluminum die-cast with PMMA window. Protection rating is IP65. Operating temperature range is -20 °C to +55 °C.
Technical Data
- Brand: SICK
- Model: DL100-11AA2103
- Series: Dx100 DL100 Standard
- Part Number: 1059961
- Range: 0.15 m … 60 m (Diamond Grade tape)
- Light Source: Red laser 658 nm, Class 2, <1 mW
- Cycle Time: ≥ 1 ms internal
- Repeatability: 0.5 mm … 1 mm (1 σ)
- Accuracy: Typ. ± 2 mm … ± 3 mm
- Max Velocity: 15 m/s
- Max Acceleration: 15 m/s²
- Interface: RS-422 (asynchronous, point-to-point)
- Digital Outputs: 2x push-pull (PNP/NPN, configurable)
- Input: Multifunctional (MF)
- Supply: DC 18 V … 30 V
- Power: Typ. 8 W … 10 W
- Power Connector: M12 4-pin male
- RS-422 Connector: M12 8-pin female (SPEEDCON™)
- Operating Temp: -20 °C … +55 °C
- Storage Temp: -40 °C … +75 °C
- Protection: IP65
- Dimensions: 69.4 x 82.5 x 100.2 mm
- Weight: Approx. 800 g
Oiltech Controls Review
- Solid choice for RS-422 legacy systems.
- Low power draw suits remote cabinets.
- Condition monitoring cuts downtime.
- Compact size fits tight machine frames.
Oiltech Controls’s Insight
- Best for 60 m range, not 300 m jobs.
- RS-422 limits network size.
- Use Diamond Grade tape for full range.
- No internal heater, so avoid cold rooms.
Compatible Equipment
- ASRS cranes and shuttles
- RS-422 PLC and motion controllers
- High-speed positioning gantries
- Legacy warehouse control systems
Installation Notes
- Mount with 3-axis alignment bracket.
- Align beam to reflective tape.
- Use M12 4-pin for power.
- Use M12 8-pin for RS-422.
- Keep window clean for accuracy.
Commissioning and Care
- Set parameters via LC display.
- Check signal level during setup.
- Monitor laser aging in diagnostics.
- Clean PMMA window with soft cloth.
- Verify IP65 seals after service.
Why Buy From Oiltech Controls?
- 15+ years in industrial automation parts.
- Global shipping via FedEx, UPS, DHL.
- Tested surplus and refurbished options.
- 12-month warranty on every order.
- Pre-shipment technical check on all units.
- Legacy and obsolete system support.
Shipping and Warranty
- 12-month warranty included.
- 24-28 hour dispatch on stock items.
- FedEx, UPS, DHL delivery.
- Tracking number provided.
FAQ
- Q: Can I use this sensor for 200 m?
A: No. The DL100-11AA2103 tops out at 60 m on Diamond Grade tape. For 300 m, choose the DL100 Hi version. - Q: Does it work in a freezer?
A: No. Minimum operating temperature is -20 °C. This model has no internal heater. - Q: What cable do I need for RS-422?
A: Use an M12 8-pin female SPEEDCON™ cable. Keep runs short for reliable serial data. - Q: How do I check laser health?
A: The sensor monitors laser diode aging. Read this via the LC display or serial diagnostics. - Q: Is this a good fit for a new EtherNet/IP line?
A: No. This model uses RS-422. For EtherNet/IP, pick the DL100-23HA2110 or similar fieldbus model.
SEO Title and Meta
Not shown in code per request.
Contact
- Email: info@oiltechcontrols.com
- Phone / WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.
Reviews
There are no reviews yet.