DL100-22AA2211 SICK DL100 Pro 200 m EtherCAT Distance Sensor

DL100-22AA2211 SICK Dx100 DL100 Pro Long-Range EtherCAT Laser Sensor

The DL100-22AA2211 is a SICK Dx100 DL100 Pro laser distance sensor. It reaches 200 m on Diamond Grade reflective tape. This model doubles the range of the DL100-21AA2211 while keeping the same fast 1 ms cycle. It uses EtherCAT for real-time feedback in storage and retrieval machines, cranes, and shuttle systems. The DL100-22AA2211 suits long travel axes where standard sensors lose signal.

At a Glance

• Brand: SICK
• Model: DL100-22AA2211
• Part number: 1095770
• Series: Dx100 DL100 Pro
• Range: 0.15 m to 200 m
• Interface: EtherCAT, 100 Mbit/s, CoE
• Cycle: ≥ 1 ms internal
• Protection: IP65

Optical and Measuring Data

• Measuring principle: phase shift optical time-of-flight.
• Range: 0.15 m to 200 m on Diamond Grade tape.
• Light source: visible red laser diode, 658 nm.
• Laser class: Class 2 per IEC 60825-1:2014.
• Average optical power: less than 1 mW.
• Repeatability: 0.5 mm to 1 mm, typical 0.5 mm at 1 σ.
• Accuracy: typical ± 2 mm to ± 3 mm.
• Tracking velocity: up to 15 m/s.
• Acceleration: up to 15 m/s².

Electrical and Interface Data

• Fieldbus: EtherCAT, 100 Mbit/s, CoE protocol.
• Digital outputs: 2x push-pull, PNP/NPN, configurable B/Q, ≤ 100 mA.
• Multifunctional input: MF input available.
• Supply voltage: DC 18 V to 30 V, reverse-polarity protected.
• Power consumption: typical 8 W to 10 W.
• Power connector: M12 4-pin male.
• EtherCAT In/Out: 2x M12 4-pin female, D-coded, SPEEDCON™.

Mechanical and Environment Data

• Operating temperature: -20 °C to +55 °C.
• Storage temperature: -40 °C to +75 °C.
• Protection rating: IP65 per EN 60529.
• Dimensions: 69.4 mm x 82.5 mm x 100.2 mm.
• Housing: aluminum die-cast with PMMA optical window.
• Weight: approx. 800 g.

Diagnostics and Condition Monitoring

• Tracks signal level attenuation.
• Monitors laser diode aging.
• Logs internal temperature.
• Shows status on integrated LC display.
• Supports preventive maintenance planning.

Installation Notes

• Use a rigid mount for long-range stability.
• Align beam to Diamond Grade reflective tape.
• Use the optical 3-axis alignment bracket for fine adjustment.
• Keep the PMMA window clean and free of dust.
• Route EtherCAT cables away from high-power motor lines.
• Check signal strength on the LC display after mounting.

Commissioning and Service

• Navigate menus through the integrated LC display.
• Set EtherCAT parameters via CoE protocol.
• Verify output timing against the fieldbus cycle.
• Clean the optical window with a soft cloth.
• Inspect M12 connectors for tightness.
• Replace unit if laser aging causes drift.

Compatibility

• EtherCAT networks with CoE support.
• DC 18 V to 30 V power systems.
• M12 4-pin power and D-coded EtherCAT cables.
• Optical 3-axis alignment bracket.
• ASRS controllers and motion PLCs.

Standards and Certifications

• Laser safety: Class 2 per IEC 60825-1:2014 and EN 60825-1:2014.
• Enclosure: IP65 per EN 60529.
• Fieldbus: EtherCAT 100 Mbit/s, CoE protocol.

Packing List

• 1x SICK DL100-22AA2211 sensor.
• 1x documentation if available.
• Protective transport packaging.

Warranty and Dispatch

• 12-month warranty included.
• Dispatch within 24 to 28 hours.
• Shipping by FedEx, UPS, and DHL.
• Global shipment support.
• Technical verification before shipment.

Best Fit Equipment

• Automated storage and retrieval systems (ASRS).
• Stacker cranes with long travel axes.
• Shuttle systems and rail-guided vehicles.
• Portal cranes and gantry systems.
• Long conveyor positioning lines.
• Heavy machinery with high dynamic motion.

Oiltech Controls Review

Oiltech Controls supplies the DL100-22AA2211 as a tested industrial spare. The 200 m range makes it a direct fit for long-axis ASRS and crane projects. Each unit is verified before dispatch. Engineers get stable EtherCAT feedback and clear diagnostics. For obsolete or hard-to-find SICK sensors, Oiltech Controls offers a practical supply route.

Oiltech Controls’s Insight

• Choose the DL100-22AA2211 when travel exceeds 100 m.
• Keep the same 1 ms cycle and 15 m/s tracking as the 100 m model.
• Use Diamond Grade tape for full range performance.
• Check signal level early during commissioning.
• Plan spare units for high-duty ASRS cranes.

Why Buy From Oiltech Controls?

• 15+ years in industrial automation spare parts.
• Global shipment support with FedEx, UPS, and DHL.
• Tested industrial surplus and refurbished options.
• 12-month warranty on eligible products.
• Technical verification before shipment.
• Support for obsolete control systems.
• Contact: info@oiltechcontrols.com or +86 158 8020 0923.

FAQ

Q: What is the main difference between DL100-22AA2211 and DL100-21AA2211?

A: The DL100-22AA2211 reaches 200 m. The DL100-21AA2211 reaches 100 m. Both share the same 1 ms cycle and EtherCAT interface.

Q: Can I use the DL100-22AA2211 on a 150 m ASRS aisle?

A: Yes. The 200 m range gives headroom for tape placement and alignment tolerance. Keep the tape clean for best signal.

Q: What should I check before buying a used DL100-22AA2211?

A: Ask for signal level history, laser aging data, and temperature logs. Oiltech Controls verifies these points before shipment.

Q: Does the DL100-22AA2211 work with standard EtherCAT masters?

A: Yes. It uses EtherCAT at 100 Mbit/s with CoE protocol. Most industrial masters support this standard.

Q: How do I choose between the 100 m and 200 m DL100 Pro models?

A: Match range to your longest travel axis. Choose the DL100-22AA2211 for runs over 100 m. Choose the 100 m model for shorter axes to reduce cost.

Q: How fast can Oiltech Controls ship the DL100-22AA2211?

A: We dispatch within 24 to 28 hours after order confirmation. We ship by FedEx, UPS, or DHL.

Q: What support does Oiltech Controls offer for obsolete SICK systems?

A: We source hard-to-find parts and support obsolete control systems. Email info@oiltechcontrols.com for a quote.

Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.